Editing Or Deleting An Existing Folder - Muratec MFX-1450 Software Manual

4
5
6
7
8
9
NOTE
• A printer has margins where no print is allowed. Depending on the printer being
used, the printed document size may be automatically reduced, because the
document data exceeds the margins.
• To prevent this, you should specify upper/lower and right/left margins in advance,
which are not included in the printing area, so that the printer can print the
document data except for the preset margins.
• To specify the margins, click the [Margin...] button, and specify the upper, lower,
right and left margins on the "Margin detail settings" screen.

Editing or deleting an existing folder

1
2
3
4
5-18 M
uratec
PC_Users_Guide.indb 18
Click "Browse...".
Browse the computer and specify the shared folder to register.
Click "OK".
Click the list button in "Printer" and specify a printer registered on the com-
puter.
Enter a printer name in "Name".
The registered name will be displayed on the machine control panel.
Enter the account and password for logging in to the shared folder in each field.
See "Opening the environment setting" on page 5-17 and open the setting
screen.
Click the "Folder" Tab.
Select the folder to edit or delete.
To edit the folder, click [Register/Edit] and overwrite the current setting. Then
click [OK].
To delete the folder, click [Erase].
ob S P M
can to rint onitor
2007/04/27 10:18:11