Authentication Settings - Muratec MFX-1450 Software Manual

Authentication Settings

The Network Authentication feature supports Kerberos, the highest security
level within Active Directory. This product includes RSA BSAFE® Cryptographic
software from RSA Security Inc. When the setting is activated, users must enter
their domain user name and password to authenticate themselves and access the
machine.
1
2
Items
Server Type
Domain Name
Modes Requiring
Authentication
3
4-58 n
etwork
PC_Users_Guide.indb 58
Open the "Admin Tools" screen. (see page 4-4)
Click [Authentication Settings].
The �Au��he���i����i�� �e����i���s�� s�ree� �i�� ���e�r�
Descriptions
Select the server type.
"Active Directory" - If your server is Windows 2000 server
"Windows NT" - If your server is Windows NT Server.
"None" - To cancel the setting, select this.
NOTE
• The DNS server should be set up when using the
authentication mode with Active Directory (Windows
2000 server/ Windows Server 2003).
If you are using Active Directory, the "Windows Time
Service" must be activated on the Active Directory.
The WINS settings should be set up when using the
authentication mode with Windows NT Server 4.0.
If you are using Windows NT Server 4.0, the version
must be Service Pack 4 or later.
Enter the Domain Name.
NOTE
• In Active Directory, the domain name may contain up
to 64 characters.
In Windows NT Server 4.0, the domain name may
contain up to 15 characters.
Select the mode that requires the authentication.
When you are finished, click [Save] to save the settings.
c
onfiGuration
or Windows Server 2003, select this.
2007/04/27 10:18:07