Muratec MFX-1450 Software Manual page 14

NOTE
If the network settings code (see "Network Setting Codes" on page 4-57) has been
set, you must enter the proper four-digit passcode using the numeric keys and press
[Enter].
4
5
6
7
1-6 tcP/iP
PC_Users_Guide.indb 6
Press [TCP/IP Settings].
The TCP/IP setting menu appears.
Register these settings. (See pages 1-7 to 1-9.)
After you have registered the network settings, please reboot the machine. To
reboot the machine, press [OB Shutdown] and turn the machine "Off" and after
three or more seconds, turn the machine back "On".
SettinGS
2007/04/27 10:17:39