Electrical Connection - Champion MD-1000HT Installation Manual

The dishwasher must be electrically grounded according to all local codes and regulations
Disconnect the main electric supply and place a tag at the fuse or disconnect switch
indicating that work is being performed on that circuit.
1. Locate the control cabinet keys on the rear of the control cabinet.
2. Remove 1 key to unlock the cabinet; do not remove the other key.
3. Unlock the control cabinet and remove the cover.
4. Locate the power cord on the left rear side of the control cabinet.
5. Locate the Machine Electrical Connection Data Plate mounted near the terminal block.
The MACHINE ELECTRICAL CONNECTION DATA PLATE
dishwasher power requirements.
unless an authorized factory representative instructs you to use other data.
6. Check the power cord terminal connections at the main terminal board.

Electrical Connections (1000 Series LT)
Warning:
governing the installation of electrical service.
Warning:
DO NOT
Machine Electrical
Connection Data Plate
Main terminal block
1000 Series LT - Installation Guide
Installation Guide
is the certified authority for the
use electrical data from any other source
29