Table of Contents
Advertisement
DO NOT flip the dishwasher power switch
"ON" until you read the instructions below.
1. The built-in stainless steel electric booster
was shipped without water.
2. A manila card located above the power
switch explains how to turn the machine
on for the first time.
See step No. 10 on the next page for the first
DISHWASHER POWER UP procedure.
Let's begin the Initial Start-up:
1. Check the placement of the dishwasher:
Compare the machine location with the
building plan or consult the owner or the
General Contractor for approval.
Check that the dishwasher configuration
straight-through or corner operation is correct
(See page 2 for details).
2. Check that all options and/or accessories are
installed.
3. Remove protective white wrapping, tape, and
other packing materials and discard.
4. Remove any foreign materials from the interior
of the machine.
1000 Series HT - Installation Guide
Initial Start-up (1000 Series HT)
Caution:
Installation Guide
Continued on page 16
15
- Quick Links:
- Service Replacement Parts
Hide quick links:
Advertisement
Table of Contents
