Plumbing Connections - Champion MD-1000HT Installation Manual

1000 Series LT - Installation Guide
Installation Guide

Water Connection (1000 Series LT)
Water supply:
Plumbing installer must connect a 3/4" NPT hot water supply line to the dishwasher.
A 3/4" pressure regulating valve (PRV) (not supplied) must be installed in the water
supply line and adjusted to (35 psi/241 KPa static pressure) 7-10 psi/48-69Kpa flow pressure
Under NO circumstances, may the installing plumber connect a water supply line to the
(3/4" NPT line strainer not supplied)
30
3/4" NPT hot water supply (140°F/60°C minimum)
(35 psi/241 KPa static pressure) 7-10 psi/48-69Kpa flow pressure
dishwasher that is less than 3/4" NPT in size.
Note:
Note: