1000 Series HT - Installation Guide
Installation Guide
Unpack and Place (1000 Series HT)
1. Compare the dishwasher and site utility connections.
2. Level the dishwasher by adjusting the bullet feet.
3. Raise the doors and check the door clearance to the ceiling.
4. Move the dishwasher to its permanent location.
Installers must follow applicable sanitation, safety, plumbing, and electrical codes and
regulations; and work in accordance with best practices for dishwasher installation.
Utility Connections - 1000 Series HT
Power:
Water supply:
Drain:
Chemicals:
4
208-240V Single or Three Phase
3/4" NPT hot water supply (140°F/60°C minimum) for 40° F/22° C rise booster
(35 psi/241 KPa static pressure) 7-10 psi/63-69Kpa flow pressure
3/4" NPT hot water supply (110°F/43°C minimum) for 70° F/39° C rise booster
(35 psi/241 KPa static pressure) 7-10 psi/63-69Kpa flow pressure
1-7/8" stainless steel, slip-fit hose connection
Max flow: 15 Us gal/min. (13.5 Imperial gal/min) 57liters/min.
Detergent and rinse-aid products are supplied by a chemical supplier
Note: