Table of Contents
Advertisement
1.
Check the corrugated box that protected the dishwasher during shipment for
punched holes or impact marks.
2.
Inspect the shipping pallet for splintered or broken boards.
3.
Inspect the exterior of the dishwasher while still mounted on the pallet for signs
of damage.
4.
Contact the freight company immediately if damage is found and save all packing
for inspection to verify your damage claim.
5.
Report the damage to your equipment supplier. They will contact our factory
for repair or replacement of damaged components.
6.
If no damage is found, proceed with lifting the dishwasher from its pallet.
Be careful to lift the dishwasher by the main frame if using a forklift.
7.
Make sure the four legs are screwed firmly in place after landing the machine.
8.
Check the packing list to ensure all accessories are with the dishwasher.
9.
Open the doors and remove the dishracks inside the machine.
10. Move the dishwasher close to its permanent location.
11. Locate the Quick Check Installation Card glued on the front door of the
dishwasher. The card has a check list to familiarize the installer with the
dishwasher installation procedures detailed in this manual.
12. Remove the protective covering from the dishwasher and identify the
utility connections. Information cards and stickers must not be removed from
the dishwasher until the installation is complete.
13. Locate but do not remove the set of 2 keys attached to the back of the top-
mounted control cabinet.
Installation Guide
Unpack and Place (1000 Series HT)
1000 Series HT - Installation Guide
vii
1
- Quick Links:
- Service Replacement Parts
Hide quick links:
Advertisement
Table of Contents
