1000 Series HT - Installation Guide
Installation Guide
Drain Connection (1000 Series HT)
Continued from page 7
1. Locate the dishwasher drain connection underneath the machine frame.
2. Install a drain line conforming to local plumbing and health regulations.
Drain:
1-7/8" stainless steel, slip-fit hose connection
Max flow: 15 US gal/min. (13.5 Imperial gal/min) 57liters/min.
Ventilation (1000 Series HT)
1. The factory has no requirements for vent hoods; but, local codes and regulations in your
area supersede our suggestions. Consult your local building and health authorities for
local requirements.
2. Dishroom ventilation must provide sufficient airflow to prevent excessive humidity in the
work area. 200-400cfm/5.6- 11.3 k Liters/min - is sufficient.
3. The dishwasher must not be subjected to continual drafts or cold air.