Table of Contents
Advertisement
1.
Check that the following utilities are connected to the dishwasher and ready for use:
Electrical service
Hot water supply
Drain
Ventilation (if required by local regulations).
2.
Check the chemical connections and chemical containers to ensure that enough chemical
supplies are available.
3.
Turn on the water supply to the dishwasher.
4.
Turn on the main power switch at the service disconnect switch.
5.
Open the dishwasher doors fully.
6.
Check upper and lower spray arms are in place and spin freely.
7.
Check that the drain-overflow and pump screen are in place.
8.
Check that the lower scrap screen is clean and in place.
1000 Series LT - Installation Guide
Installation Guide
Initial Start-Up (1000 Series LT)
33
- Quick Links:
- Service Replacement Parts
Hide quick links:
Advertisement
Table of Contents
