1000 Series HT - Installation Guide
Installation Guide
Unpack and Place (1000 Series HT)
1. The installation of your dishwasher must be performed by qualified service personnel.
2. Problems due to improper installation are not covered by the Warranty.
3. Compare the utilities at the installation site with the specifications listed on each
model's specification sheets ( See Appendix A at the end of this manual)
4. The dishwasher data plate is located on the left, rear-corner of the top-mounted
control cabinet.
5. Study the configuration diagrams below. They show the 2 ways that the dishwasher may
be positioned.
Corner and straight-through dishwasher configurations
Note:
The correct corner installation places the dishwasher so
the top-mounted controls are easy to reach.
The minimum distance from wall to dishwasher is
4" [103mm]. The maximum distance is 6" [129].
The room ceiling height must be a minimum
of 80" [2032mm] so the doors can be removed
completely.