Laminator Specifications - DataCard RP90 User Manual

Laminator specifications

Tips – Electrical
Check that the red
•
INLET switch, located
on the back of the
laminator, is set for your
input voltage.
RP90 Plus E and RL90 User Guide
Transfer method
Transfer time
Usage environment
Temperature:
Storage environment
Temperature:
Humidity:
Power supply:
Power consumption:
Weight:
Sound level:
Halogen lamp built-in heat roller method
20 seconds. The time varies according to settings.
59° F to 86° F (15° C to 30° C)
5° F to 131°F (-15° C to 55° C)
30% to 70% (without condensation)
100-120VAC or 220-240VAC (±10%)
Approximately 200 W
17.6 lbs (8 kg)
less than 70dB(A) according
to DIN45635, part 19 (EN27779).
75