Status Monitor; Open The Status Monitor - DataCard RP90 User Manual

Status Monitor

Status Monitor

The Status Monitor can be installed when the driver is installed. The Status Monitor
handles bidirectional communication between the printer and printer driver. You can use
the Status Monitor or the printer LCD panel for many settings.

Open the Status Monitor

To open the Status Monitor window:
Tips for Success
RP90 Plus E and RL90 User Guide
• Users without administrator permissions can view settings but cannot change them.
Start the Status Monitor with Administrator permissions if you want to change
settings.
The first time you open the Status Monitor on Windows Vista, you must open it as
•
Administrator. If you do not, the Status Monitor will display the following message.
If you click Cancel, you can try to open it as an Administrator. If you click OK,
Windows Vista displays the error shown.
When you receive the error, uninstall the Status Monitor, restart Windows Vista, and
•
install the Status Monitor again.
Begin with the printer powered on and attached to the PC.
1
2 To start the Status Monitor with Administrator Permissions, do the following:
— From the Windows task bar, choose Start>Programs>RP90 Plus E Status
Monitor.
— For Windows XP and 2000, right-click the RP90 Plus E Status Monitor icon
and choose Run As... In the Run As dialog box, enter the name and
password for a user name with Administrator permissions.
— For Windows Vista, right-click the RP90 Plus E Status Monitor icon and
choose Run As Administrator.
— The first time you start the Status Monitor on Windows Vista, a Windows
Security Alert dialog box might appear. Click to use the Status Monitor.
Unblock
25