Orp Control - PoolCop Evolution Installer And User Manual

O R P C o n t r o l
Set disinfectant parameters based on ORP control.
Installed
If INSTALLED: YES, PoolCop will control the ORP according to set point value.
ORP Control display will be activated; ORP Control Alerts will be activated.
If set to NO, these functions are deactivated.
Disinfectant
Set the disinfection option and algorithms used.
READ Read and display only; no control.
CHLOR Chlorine dosing.
SALT External Salt System control.
BROMI Bromine dosing.
OCEAN For PoolCop Ocean salt chlorinator.
SPACE For Dryden Aqua Space salt chlorinator.
DA-GEN For DA-GEN Hydrolysis system.
Setpoint
Set the desired ORP value; a typical Setpoint is 650 to 760.
The ideal Setpoint varies with water treatment options, and according to refill water
types.
Boost On
If hyper-chlorination is desired, set a day of the week.
Boost To
If a day of the week is set for hyper-chlorination, set the desired the ORP value.
The Boost To value cannot be lower than Setpoint.
Minimum recommended ORP is 650mV to reduce risk of sensor fouling.
See code and regulations for recommended setting.
P o o l C o p E v o l u t i o n M a n u a l : E V 4 4 M A N U S
> Installed
Disinfectant
Setpoint
Boost on
Boost to
Priming
S E L E C T
NOTE:
O R P C O N T R O L
: YES
: Chlor
: 760 mV
: Mon
: 760 mV
: OFF
Q U I T
Text: Installed
Default: NO
Entries: YES;
NO
Text: Disinfectant
Default: Read
Entries: Read;
Chlor;
Salt;
Bromi;
Ocean;
Space;
DA-GEN
Text: Setpoint
Default: 760mV
Entries: 300 to 990mV
Text: Boost On
Default: None
Entries: None;
Mon;
Tue;
Wed;
Thu;
Fri;
Sat;
Sun
Text: Boost To
Default: 760mV
Entries: Setpoint... 990mV
P a g e | 8 7