Post Installation Inspection, Documentation, Procedures; Post Installation Inspection; Post Installation Documentation; Post Installation Procedures - PoolCop Evolution Installer And User Manual

P o o l C o p E v o l u t i o n M a n u a l : E V 4 4 M A N U S
3.10 P I
OST NSTALLATION
P o s t I n s t a l la t i on I n s p e ct i o n
After completing the installation, the installer will:
Verify that all the wiring is neat and safe.
With the system running, verify no water leaks.
Verify that the water balance is in the acceptable range.
Verify correct functioning of the equipment and peripherals, including the pool light.
P o s t I n s t a l la t i on Do c u m e n t a t i o n
Complete the product warranty registration card.
P o s t I n s t a l la t i on P r o c e d u r es
Ensure that the client has a broad knowledge of the installation, understands the functions of the PoolCop and the alerts:
Introduce system and point out main components and their functions.
Explain basic system operation, using the User Guide.
Explain that once the water is balanced, the PoolCop takes over the filtration and other functions as installed within normal
parameters.
Remind the owner that the PoolCop is a management system, not a repair system. Events outside of the norm may require
intervention and water balance.
Show Air Temperature Sensor location (if installed)
Show the Water Level Control (if installed):
Sensor location and cable routing.
o
Position and use of the water supply shut-off.
o
Pipe routing of the water supply.
o
Show water treatment options and consumables (if installed).
Show auxiliary equipment connected (if installed).
Show inputs connected (if installed).
Explain the water treatment options as installed, including the verification of consumables.
Hand over completed User Guide.
P a g e | 5 0
I , D
NSPECTION OCUMENTATION
, P
ROCEDURES