Filtration Modes - PoolCop Evolution Installer And User Manual

P o o l C o p E v o l u t i o n M a n u a l : E V 4 4 M A N U S
F i l t r a t i on M o d es
Program filtration timers and duration, manually or in automatic modes.
Whenever quitting the

FILTRATION MODES

them ON or OFF as required to match programmed run times.
Continuous
Force 24H
Force 48H
Force 72H
P a g e | 5 4
menu, PoolCop checks and adjust the status of the pump and auxiliaries and switches
Stopped
Timer
ECO+
Volume
24/24
Cycle1 =00:00-00:00
Cycle2 =00:00-00:00
Cycle1 =xx:xx-xx:xx
Cycle2 =xx:xx-xx:xx
Cycle1 =xx:xx-xx:xx
Cycle2 =xx:xx-CALC
Cycle1 =xx:xx-xx:xx
Cycle2 =xx:xx-CALC
Cycle1 =xx:xx-CALC
Cycle2 =CALC-CALC
Cycle1 =CALC-CALC
Cycle2 =xx:xx-yy:yy
Cycle1 =CALC-CALC
Cycle2 =xx:xx-yy:yy
Cycle1 =CALC-CALC
Cycle2 =xx:xx-yy:yy
Filtration is stopped. Both Cycle1 and Cycle2 timers are
set to 00:00-00:00.
Cycle1 and Cycle2 are free to be set at any value you
may choose. Make sure there is at least 30 min break
between Cycle1 and Cycle2.
Cycle1 is free to be set at any value you may choose.
Choose Cycle2 start time, duration is calculated in
accordance with pool needs based on temperature.
Cycle1 duration is taken into account.
Cycle1 is free to be set at any value you may choose.
Choose Cycle2 start time, duration is calculated in
accordance with pool needs based on turnovers. Cycle1
duration is taken into account.
Choose Cycle1 start time. Cycle1 and Cycle2 duration are
11:30min fixed value allowing a 23 hour per day filtration
duration.
Filtration will run 23 hours per day for 24 hours and then
revert to normal filtration times. Cycle1 timer settings
will be changed when entering the forced mode and
restored at the end of period.
Filtration will run 23 hours per day for 48 hours and
revert to normal filtration times. Cycle1 timer settings
will be changed when entering the forced mode and
restored at the end of period.
Filtration will run 23 hours per day for 72 hours and then
revert to normal filtration times. Cycle1 timer settings
will be changed when entering the forced mode and
restored at the end of period.
Pump is controlled and will run continuously except if
priming is lost.