NSD Absocoder NCV-40H Series Specifications & Instruction Manual page 35

Lists of update cycle setting
Switch No.
5 4 3
OFF OFF OFF
OFF OFF OFF
OFF OFF ON
OFF OFF ON
OFF ON OFF
OFF ON OFF
OFF ON ON
OFF ON ON
ON OFF OFF
ON OFF OFF
ON OFF ON
ON OFF ON
ON ON OFF
ON ON OFF
ON ON ON
ON ON ON
Important
- Always verify the function setting switch settings before beginning operation.
- Never use function switch settings which are not indicated in the specifications.
- T
urn the power OFF and then ON again
Setting
Position data reading format
value
2
OFF 0
Edge timing
ON 1
OFF 2
For more details, refer to "8-4-1 (1)".
ON 3
OFF 4
Level timing 1
ON 5
OFF 6
For more details, refer to "8-4-1 (2)".
ON 7
OFF 8
ON 9
Level timing 2
OFF 10
ON 11 For more details, refer to "8-4-1 (3)".
OFF 12
ON 13
Do not set.
OFF 14
If you do, the switch setting error will occur. (SWE is ON)
ON 15
Cautions when using the function setting switches
after the function setting switches are changed.
27
Update cycle
(ms)
0.1
0.2
0.4
0.8
0.8
1.6
3.2
6.4
3.2
6.4
12.8
25.6
51.2