Installing the expansion memory board
Perform steps 1 to 4 of the procedure of "Removing the expansion
5. When the keyboard is removed, the expansion memory slot appears.
Aligning the depression of the expansion memory board (q) with
the protrusion of the expansion memory slot (w), insert the board
on the slant until it goes to the end (e) after making sure that the
board is oriented correctly, and then press it down (r) until it is
locked into place.
Perform steps 6 to 7 of the procedure of "Removing the expansion
Checking the capacity of the expansion memory
Be sure to check that the expansion memory board is installed correctly
and FIVA detects the expansion memory you installed. If the capacity
of the expansion memory does not increase, the following problems
• The memory board is not installed correctly, or
• The memory board is not a specified one by CASIO.
To check the capacity of the RAM (The amount subtracted 16 from the
system memory.), click Start → Settings → Control Panel → System
→ System Properties → General. 16 is the capacity of RAM for using