Turning On Power
Slide and hold the power switch (
PW-LED lights up.
Turning on FIVA power after you set up Windows Me starts up Windows
First, perform the log-on operation to make the unit recognize the user.
If you use the unit alone and also not connected to a network, you can
set the unit so that the screen above does not appear.
Do not turn on and off in a short time.
When turning on the power again after turning it off, wait about 10
seconds after turning off the power.
When you want to adjust the LCD brightness, perform the following
q Adjusting the LCD brightness with the keyboard
w Adjusting the LCD brightness with the Mobile Cockpit
To increase the LCD brightness, press
To decrease the LCD brightness, press
Click the LCD brightness button (
The LCD brightness can be adjusted up to 8 grades.
), and then release it when the
) from the Mobile Cockpit.