Table of Contents
Advertisement
When the Windows Me starts up, the Welcome to Windows Me screen
appears.
7. The Windows Me desk top screen appears.
Next, perform the procedure below to change the BIOS setting.
Otherwise, if you start up this unit with the MODE B setting of the
software switch, Windows Me will start up as if the software switch is
set to MODE A.
1. Shut down Windows Me and turn off the power of this unit.
2. Turn on the power of this unit.
3. While the CASIO logo is displayed, press
BIOS setup screen appears.
4. Press
F9
(SetUp Defaults) and confirm that Yes is selected, then
press Enter .
5. Select Main by pressing
Select Keyboard by pressing
English by pressing the space key.
6. Press
(Save and Exit) and confirm that Yes is selected, then
F10
press Enter .
a few times until the
F2
.
, and then change Japanese to
115
Advertisement
Table of Contents
