Flow of Basic Setup
The following describes the flow of basic setup using, as an example, "2-pt step".
step 1
step 2
step 3
step 4
step 5
step 6
58
Flow of Basic Setup
Displaying the reference target object
Display the target profile on the Controller's LCD monitor.
p.59
Stabilizing the shape profile (APS function)
Use the APS function to perform auto-tuning to obtain the optimum
settings to match the surface shape (e.g. color, shape and material)
of the measurement object.
p.60
Registering the profile of the reference target
Use this profile to set the measurement conditions.
p.61
Selecting measurement items
Select from height, step, width, and other items to suit your particular
measurement requirements.
p.62
Setting the measurement area
The optimum region can be automatically set by simply enclosing the
desired measurement area. This area can be fine-adjusted later on.
p.63
Adjusting the judgment threshold value
Perform a test measurement and determine the threshold values.
p.64
2PTS-2 B01T2
0.00000 mm
LV:320
ZG2 User's Manual