Omron ZG2 Series User Manual page 40

Measurement range
Numerical values in the figure are for when the standard CCD mode is set. When the
CCD mode is changed, check the values in the table below.
<Mounting for regular reflection measurement>
Measurement center distance
22.3 mm
NEAR end
+0.5 mm
CENTER
0 mm
FAR end
-0.5 mm
CCD Mode Measurement
center distance
Standard mode/ 22.3mm
high-resolution
mode
High-speed
mode
Important
The beam diameter and measurement range (width) between the NEAR/FAR ends are nominal
values, and are not to be used as guaranteed values.
ZG2 User's Manual
Measurement range
(width)
2.9 mm
3.0 mm
3.1 mm
Measurement Measurement range
range (height) (width)
±0.5 mm NEAR end:
CENTER:
FAR end:
±0.25 mm NEAR end:
CENTER:
FAR end:
Mounting and Connecting Devices
Angle of intersection 40°
: Irradiation range
: Measurement rang
Beam diameter
Beam
diameter
2.9mm 40 µm
3.0mm 25 µm
3.1mm 40 µm
2.95mm 33 µm
3.0mm 25 µm
3.05mm 33 µm
37