Omron ZG2 Series User Manual page 62

1
step
Displaying the reference target object
Note
Sensor Head mounting conditions
If necessary, change the Sensor Head installing settings (for diffuse reflection measurement
or for regular reflection measurement), or change the receiving status of the Sensor Head
CCD before setting the measurement conditions.
Setting the Sensor Head Installation Status p.118
Setting the CCD Mode p.121
ZG2 User's Manual
FUN
MEAS
MEAS
1TEACH 2IMAGE
1
Switch to the STD menu.
2
Switch to the FUN mode.
The top screen of the FUN mode is
displayed.
3
Select [MEAS].
4
Set the measurement object in
place.
The profile is displayed.
Flow of Basic Setup
59