Omron ZG2 Series User Manual page 20

Data Storage
Unit ZG2-DSU11
/DSU41
Parallel Output
Unit ZG-RPD11
/RPD41
The analog signals of measurement values can be displayed
as a waveform, and judgment results can be displayed in
color.
Sensor Head-Controller extension cable (option)
Exclusive extension cables are available for extending the installation distance between the
Sensor Head and the Controller.
Cable for Sensor:
0.5 m, 2 m (flexible cable)
ZG2 User's Manual
A USB connection allows measurement data to be
captured easily on a PC. Also, the Controller can be
controlled from a PC (e.g. switching/changing of setup
data and input of measurement trigger).
Measurement data can be collected and profiles
saved. Also, up to 4096 banks' (16 banks x 256 files)
of measurement conditions can be registered if the
number of banks on the Controller is insufficient. A
USB connection allows data to be captured on a PC.
For details, refer to the ZG2-DSU User's Manual.
Measurement values and judgment
results can be output at high speed
on the parallel interface.
Measurement values and judgment
results can be acquired, and the
controller can be controlled (e.g.
setup data can be switched/changed
and measurement triggers can be
input).
RS-232C connector cable (option)
Exclusive cables are available to match
the connected device.
Graphic Data Controller ZP-C
Extension cable
ZG2-XC__CR:
(3 m, 8 m, 15 m, 25 m) (flexible cable)
PC
PLC
For PC: ZS-XRS2
For PLC/PT: ZS-XPT2
ZG2 Series
17