Omron ZG2 Series User Manual page 193

Calculations Performed on Measurement
Values Obtained on Multiple Channels
When performing measurement with Controllers in a gang-mount configuration,
calculations must be performed on measurement values obtained on multiple channels.
Set these calculations on the CH1 Controller. When Controllers are gang-mounted, the
channel selection menu is added to the calculation menu on the CH1 Controller.
 CH1-side-FUN mode-[MEAS]-[SENS]-[CALC]-[CUSTOM]-[TASK]-[X/Y]
Additional menu in
gang-mount
configuration
CH selection
Calculating Measurement Values p.86
Measuring Wide Measurement Targets p.185
190
Required Settings
Description
When setting X/Y in equations, first select the CH number and then
specify the task number.
OFF: No CH selected (default value)
CH1: Task number on CH1-side Controller can be selected.
CH2: Task number on CH2-side Controller can be selected.
ZG2 User's Manual