Measuring Angle And Point Of Intersection - Omron ZG2 Series User Manual

Measuring Angle and Point of Intersection

The angle at the point of intersection of two lines and point of intersection coordinates are
measured. Measurement of the angle and point of intersection is enabled only in the EXP
menu.
<Point of intersection angle>
Item
Angle2
<Point of intersection coordinates>
Item
Corner
Flow of Operations
The following example describes how to set point of intersection angle.
80
Setting Measurement Conditions
Description
Angle2 (θ)
P1
P2
P3
Description
P2
P1
P3
Measurement
point (X, Z)
Extracts the average value of
each region as points P1 to
P4, respectively. Points P1/P2
and P3/P4 are each joined by
P4
a straight line, and the angle
formed by the intersection
between these two straight
lines is measured. The angle
is calculated in the clockwise
direction taking the line formed
by joining points P1 and P2 as
the reference.
Extracts the average value of
each region as points P1 to P4,
respectively. Points P1/P2 and
P3/P4 are each joined by a
P4
straight line, and, the height (Z
coordinate or position (X
coordinate) of that point of
intersection is measured.
1
Switch to the EXP menu.
Switching the menu p.55
2
Assign the point of intersection
angle measurement item to an
unused task.
step4 Selecting
measurement items p.62
ZG2 User's Manual