Omron ZG2 Series User Manual page 47

Mounting on a Panel
Mount Controllers on a panel correctly according to the number of Controllers to be used.
When using only one Controller
1
Panel mount adapter
4
44
Mounting and Connecting Devices
Panel
2
3
5
Mounting
bracket
1
Push out the Controller from the
rear of the panel towards the
front.
When mounting on a panel
p.206
2
Install the short Panel Mount
Adapters on the four holes on the
Controller.
3
Install the long Panel Mount
Adapters on the two holes on the
Controller.
4
Install the Controller with Mount
Adapters attached onto the panel
from the front.
5
Hook the hooks of the mounting
fixture onto the two holes of the
short Mount Adapters and tighten
the screws.
6
Make sure that the Controller is
firmly fixed on the panel.
ZG2 User's Manual