Outline Of Programming; Outline; Programming Basics - Omron NE1A-SCPU01 - 2006 Operation Manual

Outline of Programming

6-1

Outline of Programming

6-1-1

Outline

6-1-2

Programming Basics

108
The NE1A-series Safety Network Controller is programmed by starting a
Logic Editor from the Network Configurator. As shown below, the Logic Editor
consists of a Function List where function blocks, I/O tags, and other program-
ming elements are registered and a workspace where programming is actu-
ally performed.
Programming is achieved using the function blocks, I/O tags, and other pro-
gramming elements are registered in the function list.
Function List
Programs are created from logic functions and function blocks, which indicate
commands, input tags, which indicate data input sources, and output tags,
which indicate data output destinations. The I/O are connected with connec-
tion lines.
Input tags
Workspace
Function blocks
Section 6-1
Output tags