Omron NE1A-SCPU01 - 2006 Operation Manual page 49

System Configuration
Connection with Network Configurator
Direct Connection to DeviceNet
Network Configurator
PCI Board
PCMCIA Card
Downloading/uploading configuration
the Network Configurator for devices on
data and monitoring are supported from
the network via DeviceNet.
14
The NE1A-series Controller is set and programmed using a Network Configu-
rator. The Network Configurator also enables uploading configuration data,
online monitoring of program execution status, error history checks, etc.
The Network Configurator can be used in the following three ways:
• Direct connection to DeviceNet
• USB connection to the NE1A-series Controller
• Serial connection to an OMRON PLC
A DeviceNet Board/Card enables the Network Configurator to connect directly
to the network. Remote configuration and monitoring are supported for stan-
dard nodes and safety nodes on the network. When connected directly to
DeviceNet, the Network Configurator forms one node on the network.
NE1A
Explicit message communications
Safety Slave Standard Slave
Section 1-2
Standard PLC
Standard Master