Omron NE1A-SCPU01 - 2006 Operation Manual page 28

Unit Versions of NE1A-series Controllers
Unit Versions and Programming Devices
NE1A-SCPU01
Pre-Ver. 1.0
NE1A-SCPU01-V1 with unit
version 1.0
NE1A-SCPU02 with unit
version 1.0
NE1A-series Controller Upgrade Procedure
Network Configurator version 1.6 or higher must be used when using a Safety
Logic Controller with unit version 1.0. The following table shows the relation-
ship between unit versions and Network Configurator versions.
Model number
Can be used.
Cannot be used.
Cannot be used.
Functionality has been expanded in various ways for the NE1A-SCPU01-V1
and NE1A-SCPU02 in comparison to the NE1A-SCPU01. When changing
from a NE1A-SCPU01 to a NE1A-SCPU01-V1 or NE1A-SCPU02 in a system
that uses a NE1A-SCPU01, the previous configuration data can be used by
converting it from configura-tion data for the NE1A-SCPU01 to configuration
data for the NE1A-SCPU01-V1 or NE1A-SCPU02.
Use the following procedure to create configuration data for the NE1A-
SCPU01-V1 or NE1A-SCPU02 from configuration data for the NE1A-
SCPU01.
1. Reading Configuration Data
Use the following procedure to read the configuration data with the Network
Configu-rator (version 1.6).
• Read the saved configuration data.
• Use network uploading to read configuration data from devices on the
network.
The following screen will be displayed when reading has been completed.
Network Configurator
Ver. 1.3@ Ver. 1.5@
Can be used.
Cannot be used.
Cannot be used.
7
Ver. 1.6@
Can be used.
Can be used.
Can be used.
xxix