Omron CP - PROGRAMMING MANUAL 05-2007 Programming Manual page 729

Interrupt Control Instructions
3-19-2 READ INTERRUPT MASK: MSKR(692)
Purpose
Ladder Symbol
Variations
Applicable Program Areas
696
Starting Scheduled Interrupts while Resetting the Scheduled Interrupt
Timer
When W0.01 turns ON in the following example, MSKS(690) sets the sched-
ule interrupt interval for schedule interrupt 0 to 10.5 ms (assuming the unit is
set to 0.1 ms in the PLC Setup), resets the internal timer, and starts the inter-
nal timer.
W0.01
MSKS
N 14
S &105
Reads the current interrupt processing settings that were set with
MSKS(690).
MSKR(692)
N
D
Variations Executed Each Cycle for ON Condition
Executed Once for Upward Differentiation
Executed Once for Downward Differentiation Not supported
Immediate Refreshing Specification
Block program areas
OK OK
N: Interrupt identifier
D: Destination word
Step program areas Subroutines
OK
Section 3-19
MSKR(692)
@MSKR(692)
Not supported
Interrupt tasks
OK