Simons Voss Technologies Digital SmartHandle AX A0 Manual page 247

Digital SmartHandle AX
9.8 Ignore activation or expiry date
(Manual)
Activating time zone control and time change-over
Whereas time zone control itself can only influence identification media
authorisations, the time change-over also activates time-dependent
switching of the relay in the controller. Both need to be enabled.
ü LSM open.
ü Time zone plan assigned.
1. Double-click on the SmartHandle AX entry in the matrix to open the
settings.
2. Change to the [Configuration/Data] tab.
3. Enable the Time zone management checkbox.
4. Enable the Time switching checkbox.
5. Click on the Extended configuration button.
9 The "Extended configuration" window will open.
6. Set the options for automatic and manual locking and unlocking in the
"Time-based switching" section as you require (see
changeover [ 248]
}
7. Click on the OK button.
Window closes.
9
8. Click on the Apply button.
9. Click on the Exit button.
Time zone control and time change-over are activated.
9
Editing the time zone plan
See LSM manual to edit the time zone plan.
Identification media can be given a validity date. This validity date can be
ignored if identification media need to be used regardless.
).
9.. Configuration
247 / 296
Time-controlled