Simons Voss Technologies SI.SmartHandle AX Series Manual
  1. Manuals
  2. Brands
  3. Simons Voss Technologies Manuals
  4. Door locks
  5. SI.SmartHandle AX Series
  6. Manual

Simons Voss Technologies SI.SmartHandle AX Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SmartIntego Digital
SmartHandle AX
Manual
20.03.2024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SI.SmartHandle AX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Simons Voss Technologies SI.SmartHandle AX Series

Summary of Contents for Simons Voss Technologies SI.SmartHandle AX Series

  • Page 1 SmartIntego Digital SmartHandle AX Manual 20.03.2024...

  • Page 2: Table Of Contents

    SmartIntego Digital SmartHandle AX Contents (Manual) 2 / 302 Contents Intended use.............................. 6 General................................ 7 General safety instructions ........................ 9 Product-specific safety instructions .................... 12 Meaning of the text formatting ...................... 13 Versions ............................... 14 Mechanical Override (MO) ........................ 14 Profiles ................................. 14 Fastening ................................ 14 Distances and door thicknesses ......................
  • Page 3 SmartIntego Digital SmartHandle AX Contents (Manual) 3 / 302 Variant A1.PAS24 (Downward installation with PAS24) ............ 79 7.4.1 Product-specific safety instructions...................  79 7.4.2 Scope of delivery.........................  80 7.4.3 Structure............................ 80 7.4.4 Prepare door (drilling template) ................... 81 7.4.5 Programming the fitting...................... 91 7.4.6 Installing the fitting........................ 93 Variant A3 (Tubular frame) ........................ 106...
  • Page 4 SmartIntego Digital SmartHandle AX Contents (Manual) 4 / 302 7.9.6 Programming the fitting...................... 214 7.9.7 Installing the fitting........................ 216 7.10 Variant F1 (French 195 mm backplate) ...................  226 7.10.1 Product-specific safety instructions................ 226 7.10.2 Scope of delivery........................ 227 7.10.3 Design ..............................  227 7.10.4 Programming the fitting......................
  • Page 5 SmartIntego Digital SmartHandle AX Contents (Manual) 5 / 302 17.1 Mechanical system............................  278 17.1.1 Dimensional drawings SmartHandle AX................  281 17.1.2 Dimensional drawings handles ...................  291 17.1.3 Drilling templates........................ 293 18. Declaration of conformity........................ 299 19. Help and other information ....................... 300...

  • Page 6: Intended Use

    SmartIntego Digital SmartHandle AX 1. Intended use (Manual) 6 / 302 1. Intended use Products in the SI.SmartHandle AX range consist of electronic door fittings. Users can engage SI.SmartHandle AX and open the door onto which it is fitted with an authorised ID medium, such as a transponder. The corresponding authorisations need to be issued using an electronic locking plan.

  • Page 7: General

    SmartIntego Digital SmartHandle AX 2. General (Manual) 7 / 302 2. General The SI.SmartHandle AX is an electronic fitting that can be used to open and close a door. Electronic fittings in the this range are available in the following models (also see Versions [  14]...
  • Page 8 SmartIntego Digital SmartHandle AX 2. General (Manual) 8 / 302 Digital SI.SmartHandle AX Description DS version Electronic door handle for mounting on prepared  escutcheon holes for stationary installation Suitable for handle locks with Euro profile (A) or  SwissRound (B) Outside and inside can only be operated with identification ...

  • Page 9: General Safety Instructions

    SmartIntego Digital SmartHandle AX 3. General safety instructions (Manual) 9 / 302 3. General safety instructions Signal word: Possible immediate effects of non-compliance WARNING: Death or serious injury (possible, but unlikely) CAUTION: Minor injury IMPORTANT: Property damage or malfunction NOTE: Low or none WARNING Blocked access Access through a door may stay blocked due to incorrectly fitted and/or in-...
  • Page 10 SmartIntego Digital SmartHandle AX 3. General safety instructions (Manual) 10 / 302 IMPORTANT Damage resulting from electrostatic discharge (ESD) when enclosure is open This product contains electronic components that may be damaged by electrostatic discharges. 1. Use ESD-compliant working materials (e.g. Grounding strap). 2.
  • Page 11 SmartIntego Digital SmartHandle AX 3. General safety instructions (Manual) 11 / 302 NOTE Intended use SmartIntego-products are designed exclusively for opening and closing doors and similar objects. Do not use SmartIntego products for any other purposes.  Malfunctions due to poor contact or different discharge Contact surfaces that are too small/contaminated or different discharged batteries can lead to malfunctions.

  • Page 12: Product-Specific Safety Instructions

    SmartIntego Digital SmartHandle AX 4. Product-specific safety instructions (Manual) 12 / 302 4. Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling. Please also observe the safety instructions of the drilling machine. ...

  • Page 13: Meaning Of The Text Formatting

    SmartIntego Digital SmartHandle AX 5. Meaning of the text formatting (Manual) 13 / 302 5. Meaning of the text formatting This documentation uses text formatting and design elements to facilitate understanding. The table explains the meaning of possible text formatting: Example button Example...

  • Page 14: Versions

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 14 / 302 6. Versions NOTE Avoidance of incorrect orders through the order placement guide SmartIntego components offer a wide variety of combinations. Not every combination makes sense and is actually available. A manual compilation of the product features can lead to combinations that are not available or to incorrect orders.

  • Page 15: Distances And Door Thicknesses

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 15 / 302 Fastening Variant A0  (Standing installation) [  22] Variant A1 and A2  (Downward installation) [  49] You fasten the Variant DS (Reader  Rosette fastening with SI.SmartHandle AX on both sides) (optional) mechanical through the drill holes  179]...
  • Page 16 SmartIntego Digital SmartHandle AX 6. Versions (Manual) 16 / 302 Versions Centre distance Door thickness not relevant (standing S: 38 - 60 mm installation: handle M: 59 - 80 mm A0/B0 shaft axis and profile L: 79 - 100 mm cylinder axis not con- Stationary nected to the escut- X: 100 - 200 mm...

  • Page 17: Smarthandle Ax Without Electronics

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 17 / 302 Versions Centre distance Door thickness not relevant (standing S: 38 - 58 mm installation: handle M: 59 - 78 mm shaft axis and profile Double-sided scanning L: 79 - 99 mm cylinder axis not con- (Double-sided) nected to the escut- X: 100 - 200 mm...

  • Page 18: Handle Variants

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 18 / 302 Square size with sleeve attached to 8 mm  (not included in delivery) 8.5 mm sold separately  Order the fire-retardant version of 9 mm the SI.SmartHandle AX or fire doors and emergency exit locks. With sleeve attached to 8 mm (already included in the scope of 10 mm...

  • Page 19: Surface Finishes

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 19 / 302 Letter Description U shape G (mitred) U shape (round and offset) Supplied without handle (for use with adapter sets and Accessories [  273] third-party handles, see 6.9 Surface finishes Select your surface finish SI.SmartHandle AX from: Silver/black-grey Silver/white...

  • Page 20: Reader Technology

    SmartIntego Digital SmartHandle AX 6. Versions (Manual) 20 / 302 Silver/deep black Brass/white 6.10 Reader technology Depending on the equipment, your SI.SmartHandle AX supports the following scanning methods: Passive (MIFARE Classic, Plus, DESFire )  BLE (Bluetooth Low Energy. SI.SmartHandle AX is prepared and can be ...
  • Page 21 SmartIntego Digital SmartHandle AX 6. Versions (Manual) 21 / 302 NOTE Escape & Return: Legal situation The Escape & Return Timeout can be between 30 s and 240 s (WO) re- spectively 1 s and 240 s (SVCN). The use and configuration of Escape & Return may be subject to legal regulations (e.g.

  • Page 22: Installation

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 22 / 302 7. Installation You can programme the SI.SmartHandle AX while it is still in the packaging (except MP) and then install it. You will also find information on installing the SI.SmartHandle AX in the accompanying quick guide.

  • Page 23: Scope Of Delivery

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 23 / 302 NOTE Incorrect installation SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or components due to incorrect fitting or installation. Effect on the mortise lock The SI.SmartHandle AX acts exclusively on the latch of the mortise lock. Locking and insurances Insurance companies place increased demands on a closure.

  • Page 24: Design

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 24 / 302 7.2.3 Design...

  • Page 25: Prepare Door (Drilling Template)

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 25 / 302 7.2.4 Prepare door (drilling template) ü Pin or scriber at hand. Drilling template for variant A0 (Upright ü Drilling template available (see installation) [  293] ü Drill at hand. Suitable drill bit at hand (depending on mortise lock hole diameter: ü...
  • Page 26 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 26 / 302 2. Place the drilling template on the spindle. 3. Align the drill template vertically using the printed scale.
  • Page 27 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 27 / 302 4. Mark the points to be drilled on the door.
  • Page 28 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 28 / 302 5. Remove the drilling template.
  • Page 29 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 29 / 302 6. Remove the spindle.
  • Page 30 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 30 / 302 7. Remove the mortise lock (PH2). 8. Measure the diameter of the fastening holes.
  • Page 31 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 31 / 302 Ø fastening holes Drill bits required 5.5 mm–6.3 mm 8.5 mm 6.4 mm–7.3 mm 8.5 mm 7.4 mm–8.7 mm 9.5 mm ≥ 8.8 mm 10.5 mm 9. Determine the required drill bit based on the measured diameter. 10. Drill the required holes.
  • Page 32 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 32 / 302 11. Fit the mortise lock (PH2).

  • Page 33: For Door Thickness X: Prepare Threaded Rods And Spindle

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 33 / 302 7.2.5 For door thickness X: prepare threaded rods and spindle ü Saw at hand. ü Vernier calliper at hand. PH2 screwdriver at hand. ü 1. For X: measure the door thickness. 2.

  • Page 34: Programming The Fitting

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 34 / 302 Door thickness + 37 mm (±4 mm) 4. For X: use a suitable saw to cut the threaded rods and spindle. 7.2.6 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 35 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 35 / 302...

  • Page 36: Installing The Fitting

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 36 / 302 7.2.7 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. For S, M and L: measure the door thickness. 2.
  • Page 37 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 37 / 302 3. For S, M and L: trim the cut-to-length screws L1 and L2. 4. For 7 mm spindle: place the adapter sleeve in the inner handle in such a way that the recess faces the grub screw. 5.
  • Page 38 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 38 / 302 6. Insert the interchangeable plate into the inner handle as required.
  • Page 39 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 39 / 302 7. Press the spring plate on one side against the interchangeable plate so that the spring is compressed. 8. At the same time, hook the spring plate tabs into the slot in the inner handle.
  • Page 40 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 40 / 302 10. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 11. Insert the spindle with the pin side into the fitting. Pin will snap into position in the mount.
  • Page 41 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 41 / 302...
  • Page 42 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 42 / 302 12. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre of the spindle. Use a punch and hammer to make an indent in the ad- apter sleeve to prevent it from slipping.
  • Page 43 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 43 / 302 13. Insert the fitting with the spindle into the door. Use adapter sleeves if necessary. Ø mortise lock fastening hole Adapter sleeves 5.5 mm–6.3 mm No adapter sleeves 6.4 mm–7.3 mm 6.4 mm 7.4 mm–8.7 mm 7.4 mm ≥...
  • Page 44 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 44 / 302 15. Fasten both escutcheon bases together with the L2 screws (PH2, torque 1.1 Nm). 16. Fasten the inner handle firmly with the L1 screws (PH2, torque 1.1 Nm).
  • Page 45 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 45 / 302 17. Fasten the set screw on the inner handle firmly (TX15, torque 5.0 Nm). 18. For FH: insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 46 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 46 / 302 19. For FH: screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm).
  • Page 47 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 47 / 302 20.Place the two cover plates with the notch facing downwards onto the escutcheon base and the inner handle.
  • Page 48 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 48 / 302 21. On the outside, place the cover with the notch facing downwards onto the escutcheon base. 22. Fit the outside handle into position on the fitting.

  • Page 49: Variant A1 And A2 (Downward Installation)

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 49 / 302 23. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). Fitting is now installed. 7.3 Variant A1 and A2 (Downward installation) 7.3.1 Glass door fitting You can also use the A1 version of SI.SmartHandle AX with an optionally available lock case on glass doors.

  • Page 50: Product-Specific Safety Instructions

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 50 / 302 7.3.2 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling. Please also observe the safety instructions of the drilling machine. ...

  • Page 51: Scope Of Delivery

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 51 / 302 NOTE Incorrect installation SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or components due to incorrect fitting or installation. Effect on the mortise lock The SI.SmartHandle AX acts exclusively on the latch of the mortise lock. Locking and insurances Insurance companies place increased demands on a closure.

  • Page 52: Design

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 52 / 302 7.3.4 Design...

  • Page 53: Prepare Door (Drilling Template)

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 53 / 302 7.3.5 Prepare door (drilling template) ü Pin or scriber at hand. Drilling template for variant A1 and A2 ü Drilling template available (see (Downward mounting) [  294] ü Drill at hand. Suitable drill bit at hand (Ø...
  • Page 54 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 54 / 302 2. Measure the vertical distance between the centres of the fixing holes.
  • Page 55 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 55 / 302 3. Fit the mortise lock (PH2).
  • Page 56 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 56 / 302 4. Insert the spindle into the mortise lock.
  • Page 57 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 57 / 302 5. Place the drilling template on the spindle. 6. Align the drill template vertically using the printed scale. 7. Use the distance you measured previously to determine where the points need to be drilled.
  • Page 58 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 58 / 302 8. Mark the points to be drilled on the door.
  • Page 59 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 59 / 302 9. Remove the drilling template.
  • Page 60 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 60 / 302 10. Remove the spindle.
  • Page 61 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 61 / 302 11. Remove the mortise lock (PH2).
  • Page 62 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 62 / 302 12. Drill the required holes.
  • Page 63 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 63 / 302 13. Fit the mortise lock (PH2).

  • Page 64: For Door Thickness X: Prepare Threaded Rods And Spindle

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 64 / 302 7.3.6 For door thickness X: prepare threaded rods and spindle ü Saw at hand. ü Vernier calliper at hand. PH2 screwdriver at hand. ü 1. For X: measure the door thickness. 2.

  • Page 65: Programming The Fitting

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 65 / 302 Door thickness + 37 mm (±4 mm) 4. For X: use a suitable saw to cut the threaded rods and spindle. 7.3.7 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 66 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 66 / 302...
  • Page 67 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 67 / 302 7.3.8 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. For S, M and L: measure the door thickness. 2.
  • Page 68 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 68 / 302 3. For S, M and L: trim the cut-to-length screws L1 and L2. 4. For 7 mm spindle: place the adapter sleeve in the inner handle in such a way that the recess faces the grub screw. 5.
  • Page 69 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 69 / 302 6. Insert the interchangeable plate into the inner handle as required.
  • Page 70 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 70 / 302 7. Press the spring plate on one side against the interchangeable plate so that the spring is compressed. 8. At the same time, hook the spring plate tabs into the slot in the inner handle.
  • Page 71 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 71 / 302 10. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 11. Insert the spindle with the pin side into the fitting. Pin will snap into position in the mount.
  • Page 72 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 72 / 302...
  • Page 73 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 73 / 302 12. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre of the spindle. Use a punch and hammer to make an indent in the ad- apter sleeve to prevent it from slipping.
  • Page 74 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 74 / 302 13. Insert the fitting with the spindle into the door. 14. Fasten the escutcheon base to the locking cylinder hole with the L2 screws (PH2, torque: 1.1 Nm).
  • Page 75 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 75 / 302 15. Fasten the inner handle firmly with the L1 screws (PH2, torque 1.1 Nm). 16. For FH: insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 76 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 76 / 302 17. For FH: screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm).
  • Page 77 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 77 / 302 18. Fasten the set screw on the inner handle firmly (TX15, torque 5.0 Nm). 19. Place the two cover plates with the notch facing downwards onto the escutcheon base and the inner handle.
  • Page 78 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 78 / 302 20.Fit the outside handle into position on the fitting. 21. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). Fitting is now installed.
  • Page 79 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 79 / 302 7.4 Variant A1.PAS24 (Downward installation with PAS24) 7.4.1 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling.
  • Page 80 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 80 / 302 Conditions for authorisation security Operation with Mifare Classic and/or PinCode keypad excludes authorisation security class D ac- cording to DIN EN 16867:2020. Sealing escutcheon holes Any escutcheon holes that exist may be used to manipulate the lock. 1.
  • Page 81 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 81 / 302 7.4.4 Prepare door (drilling template) ü Pin or scriber at hand. Drilling template for variant A1 and A2 ü Drilling template available (see (Downward mounting) [  294] ü Drill at hand. Suitable drill bit at hand (Ø...
  • Page 82 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 82 / 302 2. Measure the vertical distance between the centres of the fixing holes.
  • Page 83 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 83 / 302 3. Fit the mortise lock (PH2).
  • Page 84 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 84 / 302 4. Insert the spindle into the mortise lock.
  • Page 85 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 85 / 302 5. Place the drilling template on the spindle. 6. Align the drill template vertically using the printed scale. 7. Use the distance you measured previously to determine where the points need to be drilled.
  • Page 86 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 86 / 302 8. Mark the points to be drilled on the door.
  • Page 87 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 87 / 302 9. Remove the drilling template.
  • Page 88 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 88 / 302 10. Remove the spindle.
  • Page 89 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 89 / 302 11. Remove the mortise lock (PH2).
  • Page 90 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 90 / 302 12. Drill the required holes.
  • Page 91 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 91 / 302 13. Fit the mortise lock (PH2). 7.4.5 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 92 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 92 / 302...
  • Page 93 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 93 / 302 7.4.6 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. Measure the door thickness. Size Door thickness (mm) Screws (M4)
  • Page 94 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 94 / 302 2. Identify the L1 screws you need. M4x33 M4x43 M4x53 M4x63 M4x73 M4x83 NOTE Strength class ≥ 8.8 The L1 screws for the SI.SmartHandle AX in its PAS24 version must have a strength class of at least 8.8.
  • Page 95 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 95 / 302 5. For 7 mm spindle: place the adapter sleeve in the inner handle in such a way that the recess faces the grub screw. 6. Determine your inner handle’s direction rotation as viewed from the in- side: clockwise (clockwise = CW) or anti-clockwise (counter-clockwise = CCW).
  • Page 96 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 96 / 302 7. Insert the interchangeable plate into the inner handle as required. 8. Press the spring plate on one side against the interchangeable plate so that the spring is compressed.
  • Page 97 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 97 / 302 9. At the same time, hook the spring plate tabs into the slot in the inner handle. 10. Press down the spring plate bracket. The inner handle is now ready.
  • Page 98 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 98 / 302 11. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 12. Insert the spindle with the pin side into the fitting. Pin will snap into position in the mount.
  • Page 99 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 99 / 302...
  • Page 100 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 100 / 302 13. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre of the spindle. Use a punch and hammer to make an indent in the ad- apter sleeve to prevent it from slipping.
  • Page 101 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 101 / 302 14. Insert the fitting with the spindle into the door. 15. Fasten the escutcheon base to the locking cylinder hole with the L2 screws (PH2, torque: 1.1 Nm).
  • Page 102 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 102 / 302 16. Fasten the inner handle firmly with the L1 screws (PH2, torque 1.1 Nm). 17. For FH: insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 103 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 103 / 302 18. For FH: screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm).
  • Page 104 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 104 / 302 19. Fasten the set screw on the inner handle firmly (TX15, torque 5.0 Nm). 20.Place the two cover plates with the notch facing downwards onto the escutcheon base and the inner handle.
  • Page 105 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 105 / 302 21. Fit the outside handle into position on the fitting. 22. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). Fitting is now installed.
  • Page 106 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 106 / 302 7.5 Variant A3 (Tubular frame) 7.5.1 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling. Please also observe the safety instructions of the drilling machine.
  • Page 107 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 107 / 302 Conditions for authorisation security Operation with Mifare Classic and/or PinCode keypad excludes authorisation security class D ac- cording to DIN EN 16867:2020. Sealing escutcheon holes Any escutcheon holes that exist may be used to manipulate the lock. 1.
  • Page 108 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 108 / 302 7.5.4 Prepare door (drilling template) ü PH2 screwdriver at hand. Drilling template for variant A3 (Tubular ü Drilling template available (see frame) [  296] ü Pin or scriber at hand. Drill at hand.
  • Page 109 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 109 / 302 2. Place the drilling template on the spindle. 3. Align the drill template vertically using the printed scale.
  • Page 110 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 110 / 302 4. Mark the points to be drilled on the door.
  • Page 111 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 111 / 302 5. Remove the drilling template.
  • Page 112 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 112 / 302 6. Remove the spindle.
  • Page 113 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 113 / 302 7. Remove the mortise lock (PH2).
  • Page 114 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 114 / 302 8. Drill the required holes. 9. Countersink the holes with the countersink so that the blind rivet nuts can be pressed into a flush position later.
  • Page 115 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 115 / 302 10. Fit the mortise lock (PH2).
  • Page 116 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 116 / 302 7.5.5 For door thickness X: prepare spindle ü Saw at hand. ü Vernier calliper at hand. PH2 screwdriver at hand. ü 1. For X: measure the door thickness. 2. For X: mark the sawing point on the spindle. NOTE 9 mm spindle with 8 mm end The 9 mm spindle has an 8 mm end.
  • Page 117 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 117 / 302 3. For X: trim the spindle with a suitable saw. 7.5.6 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 118 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 118 / 302...
  • Page 119 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 119 / 302 7.5.7 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü 1. Insert the supplied blind rivet nuts into the door frame.
  • Page 120 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 120 / 302 2. Screw the mounting plate firmly into place on the outside so that the spring clips are facing the door (PH2, torque 1.1 Nm). 3. Screw the escutcheon base firmly to the outside (PH2, torque 1.1 Nm). 4.
  • Page 121 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 121 / 302 5. Insert the fitting into the mounts on the mounting plate.
  • Page 122 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 122 / 302 6. Push the fitting into the mounting plate until it locks into position.
  • Page 123 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 123 / 302 7. Screw the fitting firmly to the mounting plate (PH1, torque 0.8 Nm).
  • Page 124 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 124 / 302 8. Place a cover with the notch facing downwards on the escutcheon base. 9. Place the cover on the fitting.
  • Page 125 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 125 / 302 10. Fit the outside handle into position on the fitting. 11. Determine the required direction of rotation for your inner handle. 12. Insert the spring element appropriately. 13. Place the underlay in the inner handle unit.
  • Page 126 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 126 / 302 14. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre of the spindle. Use a punch and hammer to make an indent in the ad- apter sleeve to prevent it from slipping.
  • Page 127 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 127 / 302 15. Measure the total length of the spindle. 16. Locate the inside of the spindle (four-edge end up to the centre of the first groove = 26 mm). 17. Use the table to determine the position of the O-ring.
  • Page 128 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 128 / 302 Door thickness Spindle length Area Ring position (mm) (mm) 40 - 42 40 - 42 43 - 47 43 - 47 48 - 52 48 - 52 53 - 57 58 - 61 60 - 62 60 - 62...
  • Page 129 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 129 / 302 18. Slide the O-ring onto the calculated groove. 19. Insert the spindle into the door with the ring-free side as far as it will go. 20.For FH: insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 130 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 130 / 302...
  • Page 131 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 131 / 302 21. For FH: screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm). 22. Screw the inner handle unit onto the spindle (PH2, torque 1.1 Nm).
  • Page 132 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 132 / 302 23. Screw the escutcheon base firmly into place on the inside (PH2, torque 1.1 Nm). 24.Fasten the grub screws firmly onto both handles (TX15, torque 5.0 Nm).
  • Page 133 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 133 / 302 25. Place the inner handle cover with the notch facing downwards onto the inner handle escutcheon. 26.Place a cover with the notch facing downwards on the escutcheon base. Fitting is now installed.
  • Page 134 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 134 / 302 7.6 Variant A4.P11 (CISA panic bar) 7.6.1 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling.
  • Page 135 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 135 / 302 SI.SmartHandle AX with self-locking panic lock The SI.SmartHandle AX only offers full functionality with a self-locking panic lock. 1. Combine the SI.SmartHandle AX with a self-locking panic lock. 2. Pay attention to the declarations of conformity of the lock manufacturers according to EN 179.
  • Page 136 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 136 / 302 7.6.4 Preparing the door for CISA (drilling template) ü Pin or scriber at hand. Drilling template for variant A4.P11/ ü Drilling template available (see A4.P1/A4.P2 (Panic bars) [  297] ü Drill at hand.
  • Page 137 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 137 / 302 2. Place the drilling template on the spindle. 3. Align the drill template vertically using the printed scale.
  • Page 138 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 138 / 302 4. Mark the points to be drilled on the door.
  • Page 139 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 139 / 302 5. Remove the drilling template.
  • Page 140 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 140 / 302 6. Remove the spindle.
  • Page 141 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 141 / 302 7. Remove the mortise lock (PH2).
  • Page 142 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 142 / 302 8. Drill the required holes.
  • Page 143 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 143 / 302 9. Countersink the lowest hole with a countersink.
  • Page 144 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 144 / 302 10. Fit the mortise lock (PH2). 7.6.5 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 145 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 145 / 302...

  • Page 146: Installing The Fitting

    SmartIntego Digital SmartHandle AX 7. Installation (Manual) 146 / 302 7.6.6 Installing the fitting for CISA ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Saw at hand. 1. Measure the door thickness. 2.
  • Page 147 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 147 / 302 3. Use a suitable saw to cut the screws and spindle. 4. Insert the sleeve nuts into the adapter plate.
  • Page 148 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 148 / 302 5. Place the adapter plate on the electronic fitting. 6. Align the holes in the adapter plate with the threads in the fitting. 7. Fasten the adapter plate firmly in a criss-cross sequence (PH2, torque 1.1 Nm).
  • Page 149 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 149 / 302 8. Insert the spindle with the pin side into the fitting.
  • Page 150 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 150 / 302 9. Insert the fitting with the adapter plate and spindle into the door.
  • Page 151 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 151 / 302 10. Screw the fitting firmly into place in the centre (PH2, torque 1.1 Nm).
  • Page 152 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 152 / 302 11. Screw the adapter plate firmly into place below the keyhole (PH2, torque 1.1 Nm).
  • Page 153 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 153 / 302 12. Fasten the wood screw as described in the CISA documentation. 13. Insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors. 1.
  • Page 154 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 154 / 302 14. Push the handle onto the outer fitting.
  • Page 155 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 155 / 302 15. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). 16. Screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm). Fitting is now installed.
  • Page 156 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 156 / 302 7.7 Variant A4.P1/A4.P2 (BKS panic bar) 7.7.1 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling.
  • Page 157 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 157 / 302 SI.SmartHandle AX with self-locking panic lock The SI.SmartHandle AX only offers full functionality with a self-locking panic lock. 1. Combine the SI.SmartHandle AX with a self-locking panic lock. 2. Pay attention to the declarations of conformity of the lock manufacturers according to EN 179.
  • Page 158 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 158 / 302 7.7.4 Preparing the door for BKS (drilling template) ü Pin or scriber at hand. Drilling template for variant A4.P11/ ü Drilling template available (see A4.P1/A4.P2 (Panic bars) [  297] ü PH2 screwdriver at hand.
  • Page 159 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 159 / 302 2. Measure the vertical distance between the centres of the fixing holes.
  • Page 160 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 160 / 302 3. Fit the mortise lock (PH2).
  • Page 161 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 161 / 302 4. Insert the spindle into the mortise lock.
  • Page 162 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 162 / 302 5. Place the drilling template on the spindle. 6. Align the drill template vertically using the printed scale. 7. Use the distance you measured previously to determine where the points need to be drilled.
  • Page 163 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 163 / 302 8. Mark the points to be drilled on the door.
  • Page 164 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 164 / 302 9. Remove the drilling template.
  • Page 165 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 165 / 302 10. Remove the spindle.
  • Page 166 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 166 / 302 11. Remove the mortise lock (PH2).
  • Page 167 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 167 / 302 12. Drill the required holes.
  • Page 168 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 168 / 302 13. Fit the mortise lock (PH2). 7.7.5 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 169 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 169 / 302...
  • Page 170 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 170 / 302 7.7.6 Installing the fitting for BKS ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Saw at hand. 1. Measure the door thickness. 2.
  • Page 171 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 171 / 302 3. Mark the sawing points on the L2 screws. L2: door thickness + 12 mm (±3 mm) 4. Determine the length X, depending on the panic bar type. X = 32 mm X = 23 mm 5.
  • Page 172 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 172 / 302 7. Insert the sleeve nuts into the adapter plate. 8. Place the adapter plate on the electronic fitting. 9. Align the holes in the adapter plate with the threads in the fitting.
  • Page 173 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 173 / 302 10. Fasten the adapter plate firmly in a criss-cross sequence (PH2, torque 1.1 Nm).
  • Page 174 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 174 / 302 11. Insert the spindle with the pin side into the fitting. 12. Insert the fitting with adapter plate, spindle and escutcheon base into the door.
  • Page 175 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 175 / 302 13. Screw the fitting into place in the centre as described in the BKS docu- mentation (use the L1 screw and the wood screw ordered from BKS).
  • Page 176 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 176 / 302 14. Screw the escutcheon base to the assembly using the L2 screws (PH2, torque: 1.1 Nm). 15. Insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 177 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 177 / 302 16. Place the escutcheon cover on the escutcheon base. 17. Push the handle onto the outer fitting.
  • Page 178 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 178 / 302 18. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). 19. Screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm). Fitting is now installed.
  • Page 179 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 179 / 302 7.8 Variant DS (Reader on both sides) 7.8.1 Product-specific safety instructions IMPORTANT Damage by drilling You drill at your own risk. SimonsVoss Technologies GmbH is not liable for damage caused by drilling.
  • Page 180 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 180 / 302 Conditions for authorisation security Operation with Mifare Classic and/or PinCode keypad excludes authorisation security class D ac- cording to DIN EN 16867:2020. Sealing escutcheon holes Any escutcheon holes that exist may be used to manipulate the lock. 1.
  • Page 181 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 181 / 302 7.8.3 Design...
  • Page 182 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 182 / 302 7.8.4 Prepare door (drilling template) ü Pin or scriber at hand. Drilling template for DS variant ü Drilling template available (see (Reading on both sides) [  298] ü Drill at hand. Suitable drill bit at hand (depending on mortise lock hole diameter: ü...
  • Page 183 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 183 / 302 2. Place the drilling template on the spindle. 3. Align the drill template vertically using the printed scale.
  • Page 184 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 184 / 302 4. Mark the points to be drilled on the door.
  • Page 185 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 185 / 302 5. Remove the drilling template.
  • Page 186 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 186 / 302 6. Remove the spindle.
  • Page 187 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 187 / 302 7. Remove the mortise lock (PH2). 8. Measure the diameter of the fastening holes.
  • Page 188 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 188 / 302 Ø fastening holes Drill bits required 5.5 mm–6.3 mm 8.5 mm 6.4 mm–7.3 mm 8.5 mm 7.4 mm–8.7 mm 9.5 mm ≥ 8.8 mm 10.5 mm 9. Determine the required drill bit based on the measured diameter. 10. Drill the required holes.
  • Page 189 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 189 / 302 11. Fit the mortise lock (PH2).
  • Page 190 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 190 / 302 7.8.5 For door thickness X: prepare threaded rods and spindle ü Saw at hand. ü Vernier calliper at hand. PH2 screwdriver at hand. ü 1. For X: measure the door thickness. 2.
  • Page 191 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 191 / 302 Door thickness + 24 mm (±2 mm) 4. For X: use a suitable saw to cut the threaded rods and spindle. 7.8.6 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 192 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 192 / 302...
  • Page 193 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 193 / 302 7.8.7 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. For S, M and L: measure the door thickness. 2.
  • Page 194 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 194 / 302 3. For S, M and L: shorten the cut-to-length screws. 4. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 5. Insert the spindle with the pin side into the fitting. Pin will snap into position in the mount.
  • Page 195 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 195 / 302 6. For 8.5 mm, 9 mm and 10 mm spindles: slide the adapter sleeve into the centre of the spindle. Use a punch and hammer to make an indent in the adapter sleeve to prevent it from slipping.
  • Page 196 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 196 / 302 7. Insert the outer fitting, with adapter sleeves if necessary, into the door from the outside.
  • Page 197 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 197 / 302 Ø mortise lock fastening hole Adapter sleeves 5.5 mm–6.3 mm No adapter sleeves 6.4 mm–7.3 mm 6.4 mm 7.4 mm–8.7 mm 7.4 mm ≥ 8.8 mm 8.8 mm 8. Insert the escutcheon base into the door with the sleeve nuts on the outer side.
  • Page 198 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 198 / 302 9. Position the adapter plate on the door. 10. Align the adapter plate so that the spindle is precisely centred and the adapter plate is perfectly perpendicular.
  • Page 199 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 199 / 302 11. Screw the adapter plate firmly into place (PH2, torque 1.1 Nm).
  • Page 200 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 200 / 302 12. Screw the escutcheon base into place on the inner side. 13. Insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors. 1.
  • Page 201 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 201 / 302...
  • Page 202 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 202 / 302 14. Screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm). 15. Wait five hours for the anti-slip coating to set. NOTE Rest time for anti-slip surface The supplied adapter plate feature a non-slip surface. This requires a set- tling time for it to be fully effective.
  • Page 203 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 203 / 302 16. Remove the cover with the tool.
  • Page 204 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 204 / 302 17. For 7 mm spindle: attach the adapter sleeve to the spindle. 18. Insert the fitting into the adapter plate.
  • Page 205 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 205 / 302 19. Rotate the fitting until it is straight.
  • Page 206 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 206 / 302 20.Screw the fitting firmly onto the adapter plate to prevent it from twist- ing. 21. Place the cover on the fitting.
  • Page 207 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 207 / 302 22. Place the outside handles on the fittings. 23. Place the covers on the escutcheon bases. 24.Fasten the grub screws firmly onto both handles (TX15, torque 5.0 Nm). Fitting is now installed.
  • Page 208 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 208 / 302 7.9 Variants E0 and E1 (Scandinavian Oval) 7.9.1 Product-specific safety instructions IMPORTANT Damage caused by unsuitable tools If you try to open the case with unsuitable tools, the case may be damaged. Use only the supplied SimonsVoss opening tool.
  • Page 209 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 209 / 302 7.9.2 Scope of delivery SI.SmartHandle AX (Scandinavian Oval)  Special tool  Quick guide  Depending on version: Adapter set, 7 mm spindle  Adapter sleeve, 8.5 mm spindle  Adapter sleeve, 10 mm spindle ...
  • Page 210 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 210 / 302 7.9.4 For door thickness X: prepare threaded rods and spindle ü Saw at hand. ü Vernier calliper at hand. PH2 screwdriver at hand. ü 1. For X: measure the door thickness. 2.
  • Page 211 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 211 / 302 Door thickness + 37 mm (±4 mm) 4. For X: use a suitable saw to cut the threaded rods and spindle. 7.9.5 For inner door handle, clockwise: prepare stud bolts ü TX3 screwdriver at hand. 1.
  • Page 212 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 212 / 302 2. Unscrew the SI.SmartHandle AX rear (TX8). 3. Unscrew the stud nuts.
  • Page 213 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 213 / 302 4. Re-fasten the stud nuts firmly in the new positions.
  • Page 214 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 214 / 302 5. Screw the SI.SmartHandle AX rear firmly into place again (TX8, torque 1.1 Nm). Stud nuts are fastened through the SI.SmartHandle AX rear again. 7.9.6 Programming the fitting Programme the fitting before installation. You can use different programming devices, depending on the product family.
  • Page 215 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 215 / 302...
  • Page 216 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 216 / 302 7.9.7 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. For S, M and L: measure the door thickness. 2.
  • Page 217 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 217 / 302 3. For S, M and L: trim the cut-to-length screws L1 and L2. 4. For 7 mm spindle: place the adapter sleeve in the inner handle in such a way that the recess faces the grub screw. 5.
  • Page 218 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 218 / 302 6. Insert the interchangeable plate into the inner handle as required.
  • Page 219 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 219 / 302 7. Press the spring plate on one side against the interchangeable plate so that the spring is compressed. 8. At the same time, hook the spring plate tabs into the slot in the inner handle.
  • Page 220 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 220 / 302 10. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 11. For 8.5 mm and 10 mm spindle: slide the adapter sleeve into the centre of the spindle.
  • Page 221 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 221 / 302 12. Insert the spindle with the pin side into the fitting. Pin will snap into position in the mount.
  • Page 222 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 222 / 302 13. Insert the fitting with the spindle into the door from the outside. 14. Fasten the escutcheon base firmly with the L1 screws (PH2, torque 1.1 Nm).
  • Page 223 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 223 / 302 15. For non-MO: fasten the inner handle with the L2 screws (PH2, torque 1.1 Nm).
  • Page 224 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 224 / 302 16. For non-MO: position the escutcheon cover on the escutcheon base. 17. Fasten the set screw on the inner handle firmly (TX15, torque 5.0 Nm).
  • Page 225 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 225 / 302 18. Fit the outside handle into position on the fitting. 19. Firmly fasten the grub screw on the outside handle (TX15; torque: 5.0 Nm). Fitting is now installed.
  • Page 226 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 226 / 302 7.10 Variant F1 (French 195 mm backplate) 7.10.1 Product-specific safety instructions IMPORTANT Damage caused by unsuitable tools If you try to open the case with unsuitable tools, the case may be damaged. Use only the supplied SimonsVoss opening tool.
  • Page 227 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 227 / 302 7.10.2 Scope of delivery SI.SmartHandle AX (Version for 195 mm French backplate)  Special tool  Quick guide  Depending on version: Adapter set, 7 mm spindle  Adapter sleeve, 8.5 mm spindle ...
  • Page 228 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 228 / 302...
  • Page 229 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 229 / 302 7.10.5 Installing the fitting ü Door pre-drilled. ü PH2 screwdriver at hand. TX15 screwdriver at hand. ü Vernier calliper at hand. ü ü Pincers at hand. 1. Measure the door thickness. 2.
  • Page 230 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 230 / 302 3. Trim the cut-to-length screws. 4. For 7 mm spindle: insert the adapter sleeve onto the side of the spindle with the pin. 5. Insert the spindle with the pin side into the fitting.
  • Page 231 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 231 / 302 6. Screw the outer adapter plate to the fitting (PH2, torque 1.1 Nm). You can identify the outer adapter plate by the welded stud bolt nuts. 7. Hold the countersunk nuts with the special tool and screw the escut- cheon base firmly to the outer adapter plate (PH2, torque 1.1 Nm).
  • Page 232 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 232 / 302 8. For 7 mm spindle: place the adapter sleeve in the inner handle in such a way that the recess faces the grub screw. 9. Hold the countersunk nuts firmly with the special tool and screw the in- ner handle and the escutcheon base tightly onto the inner adapter plate (PH2, torque: 1.1 Nm).
  • Page 233 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 233 / 302 11. Insert the fitting with the adapter plate and the spindle into the door from the outside.
  • Page 234 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 234 / 302 12. Screw the inner handle and adapter plate firmly into place (PH2, torque 1.1 Nm). 13. For FH: insert the dummy cylinder. NOTE Feed the blank cylinder into the hole using a screwdriver It is difficult to position the blank cylinder correctly, especially in thick doors.
  • Page 235 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 235 / 302 14. For FH: screw the dummy cylinder firmly into place (PH2, torque 1.1 Nm).
  • Page 236 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 236 / 302 15. Fit the outside handle into position on the fitting. 16. Fasten the grub screws firmly onto both handles (TX15, torque 5.0 Nm).
  • Page 237 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 237 / 302 17. Place a cover with the notch facing downwards on the escutcheon base.
  • Page 238 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 238 / 302 18. Place the two cover plates with the notch facing downwards onto the escutcheon base and the inner handle. Fitting is now installed. 7.11 LockNode (LN) 7.11.1 Information for SmartIntego users SimonsVoss recommends the following approach: 1.
  • Page 239 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 239 / 302 7.11.2 Fitting the LockNode ü Special tool at hand. 1. Insert the special tool into the fitting’s cover inlay. 2. Slide the cover downwards and remove it completely. 3. Insert the LockNode circuit board into the slot provided. SI.SmartHandle AX will bleep and flash red four times.
  • Page 240 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 240 / 302...
  • Page 241 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 241 / 302 4. Insert the corner of the extension piece under the transparent plastic ring.
  • Page 242 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 242 / 302 5. Place the cover on the fitting.
  • Page 243 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 243 / 302 6. Press the cover firmly until it clicks into place. The LockNode is now installed. 7.12 FSB adapter 7.12.1 Scope of delivery Washers for use with the Adapter sleeve for the Black plastic disc for the M4 screws in the M5 outer side incl.
  • Page 244 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 244 / 302 ASL bearing: direction-independent  FSB handles in various designs  Rosettes and trim panels  SI.SmartHandle AX  FSB-AGL bearing for inner side with L marking: 7.12.2 Structure...
  • Page 245 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 245 / 302 7.12.3 Install FSB handle with adapter Preparation for assembly The SI.SmartHandle AX must be dismantled to replace the outer side  handle SI.SmartHandle AX (alternative: order without handle). It must also be dismantled if the mounting holes in the door need to be customised.
  • Page 246 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 246 / 302 1. Remove the rubber ring from the outer square spindle of the SI.Smart- Handle AX. 2. Place the black plastic disc on the outer square spindle. 3. Align the FSB adapter so that the hole for the handle grub screw is fur- ther inwards in the direction of the door.
  • Page 247 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 247 / 302 4. Mount the FSB adapter on the outer square spindle. 5. Tighten the FSB adapter with the short grub screw.
  • Page 248 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 248 / 302 6. Place the FSB outer side handle including pre-assembled grub screw on the adapter. 7. Fasten the half cylinder with the fastening screw. 8. Push the FSB bearing onto the square spindle.
  • Page 249 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 249 / 302 9. Fasten the FSB bearing with the previously used screws and washers. It may be necessary to customise the length of the screws. 10. Place the FSB rosette cover on the FSB bearing. 11.
  • Page 250 SmartIntego Digital SmartHandle AX 7. Installation (Manual) 250 / 302 12. Fasten the FSB inner side lever handle with the grub screw. The SI.SmartHandle AX is supplied with an FSB handle set.
  • Page 251 SmartIntego Digital SmartHandle AX 8. Programming (Manual) 251 / 302 8. Programming See TechGuide WO/SVCN.
  • Page 252 SmartIntego Digital SmartHandle AX 9. Configuration (Manual) 252 / 302 9. Configuration See TechGuide WO/SVCN.
  • Page 253 SmartIntego Digital SmartHandle AX 10. Status messages (Manual) 253 / 302 10. Status messages See TechGuide WO/SVCN.
  • Page 254 SmartIntego Digital SmartHandle AX 11. Signal (Manual) 254 / 302 11. Signal See TechGuide WO/SVCN.
  • Page 255 SmartIntego Digital SmartHandle AX 12. Battery warning (Manual) 255 / 302 12. Battery warning You or the user will be warned of a failure of the SI.SmartHandle AX by flat Battery replacement [  256] batteries. Replace the batteries in time (see The electronic part with the batteries is located on the outside.
  • Page 256 SmartIntego Digital SmartHandle AX 13. Battery replacement (Manual) 256 / 302 13. Battery replacement 13.1 Instructions on battery replacement Only specialists may replace the batteries.  Do not touch electronics/components; do not allow them to come into  contact with oil, paint, moisture, alkali or acids. Only use batteries approved by SimonsVoss.
  • Page 257 SmartIntego Digital SmartHandle AX 13. Battery replacement (Manual) 257 / 302 5. Press the end of the battery clip inwards until it pops out. IMPORTANT Loss of the battery clip The battery clip is plugged in. If both ends of the clip are pushed inwards and released from the holder at the same time, the battery clip may fall out.
  • Page 258 SmartIntego Digital SmartHandle AX 13. Battery replacement (Manual) 258 / 302 12. Slide the cover back onto the SI.SmartHandle AX. 13. Press the cover firmly in the area of the recesses for the mounting tool until it snaps into place. Sabotage contact in the cover triggers battery measurement.
  • Page 259 14. Maintenance, cleaning and disinfec- SmartIntego Digital SmartHandle AX tion (Manual) 259 / 302 14. Maintenance, cleaning and disinfection If necessary, clean the SI.SmartHandle AX with a soft and, if necessary,  damp cloth. When disinfecting the SI.SmartHandle AX, only use agents that are ...
  • Page 260 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 260 / 302 15. Disassembly You will also find information on disassembly in the supplied quick guides. 15.1 Variante A0 (Standing/PAS24) The following tools are required for disassembly: TX-15 screwdriver  Slotted-head screwdriver ...
  • Page 261 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 261 / 302 Remove handle from assembly 1. Insert the hex key into the hole provided in the square socket. 2. Push the hex key towards the closest edge and hold it down. 3.
  • Page 262 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 262 / 302 Remove escutcheons 1. Disassemble electronic cylinders if necessary. 2. Unscrew the headless screws of both handles. 3. If necessary, remove the escutcheon covers with a slotted screwdriver. 4. If necessary, remove the escutcheon covers. 5.
  • Page 263 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 263 / 302 3. Pull the handle off the assembly. SI.SmartHandle AX is now removed. 15.3 Variant A3 (steel frame) Remove fittings 1. Disassemble electronic cylinders if necessary. 2. Unscrew the headless screws of both handles. 3.
  • Page 264 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 264 / 302 Removing the handle from the assembly 1. Insert the Allen wrench into the hole provided in the square socket. 2. Push the Allen wrench towards the nearer edge and hold it pressed. 3.
  • Page 265 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 265 / 302 NOTE Third party product with own documentation The panic bar holder is a third-party product. Please follow the manufacturer's instructions and safety instructions.  2. Remove the covers of the escutcheons with a slotted screwdriver. 3.
  • Page 266 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 266 / 302 2. Push the Allen wrench towards the nearer edge and hold it pressed. 3. Remove the handle from the assembly. SI.SmartHandle AX is disassembled. 15.4.2 CISA 1. Remove the panic bar as described in the manufacturer's documenta- tion except for the adapter plate.
  • Page 267 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 267 / 302 Removing the handle from the assembly 1. Insert the Allen wrench into the hole provided in the square socket. 2. Push the Allen wrench towards the nearer edge and hold it pressed. 3.
  • Page 268 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 268 / 302 5. If necessary, unscrew the escutcheon bases. 6. Remove the cover of the SmartHandles AX that is attached to the ad- apter plate. 7. Unscrew the screw above the card reader. 8.
  • Page 269 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 269 / 302 3. Remove the handle from the assembly. SI.SmartHandle AX is disassembled. 15.6 Variant E0 and E1 (Scandinavian Oval) You need the following tools for disassembly: TX-15 screwdriver  Slotted-head screwdriver ...
  • Page 270 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 270 / 302 Removing the handle from the assembly 1. Insert the Allen wrench into the hole provided in the square socket. 2. Push the Allen wrench towards the nearer edge and hold it pressed. 3.
  • Page 271 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 271 / 302 1.5 mm hex key  Remove escutcheons 1. If necessary, remove the electronic cylinder. 2. Use the grub screws to tighten both handle. 3. If necessary, lever off the rosette covers with a flat-blade screwdriver. 4.
  • Page 272 SmartIntego Digital SmartHandle AX 15. Disassembly (Manual) 272 / 302 3. Pull the handle off the assembly. SI.SmartHandle AX is now removed.
  • Page 273 SmartIntego Digital SmartHandle AX 16. Accessories (Manual) 273 / 302 16. Accessories Third-party handle adapter Order code Description Compatibility Adapter set for FSB www.FSB.de handle ( All FSB models from from FSB model year 2018 onwards 2018 equipped with one of the following mount- S2.ADAPTER.FSB ings:...
  • Page 274 SmartIntego Digital SmartHandle AX 16. Accessories (Manual) 274 / 302 Order code Description Please specify length of square Distances and door spindle (see thicknesses [  15]    S2.SQUARE.x.x  Please specify diameter (see Spindle [  17] 7 mm  8 mm ...
  • Page 275 SmartIntego Digital SmartHandle AX 16. Accessories (Manual) 275 / 302 Order code Description Cover for variant A1/B1 (suspended S2.COVER.1.W short) in white Cover for variant A1/B1 (suspended S2.COVER.1.TS short) in deep black Cover for variant A2/B2 (suspended S2.COVER.2.SG long) in black-grey Cover for variant A2/B2 (suspended S2.COVER.2.W long) in white...
  • Page 276 SmartIntego Digital SmartHandle AX 16. Accessories (Manual) 276 / 302 Order code Description Screw set, please specify length Distances and door thick- (see nesses [  15]  S2.SCREW.x    Equalising bushes for variants A0/ S2.COMPSHELL B0 (10 bags with 2x3 pieces each in three different lengths) Rosette Order code...
  • Page 277 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 277 / 302 17. Technical specifications Euro Profile cylinder  Types Scandinavian Oval  Swiss Round  Passive  Read systems BLE ready  MIFARE® Classic  MIFARE DESFire® EV1/EV2  Supported cards (Wireless Online WO) UID (card serial number) according to ...
  • Page 278 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 278 / 302 Administration and settings Wireless Online (WO): Integrated  LockNode (LNI) Networking capability SmartIntego Virtual Card Network  (SVCN): Not network-compatible Other information Can be upgraded Upgradeable firmware Entrys in the access list Max.
  • Page 279 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 279 / 302 A0 (standing)  A1 (suspended,  short) 21 mm A2 (suspended,  long) E0/E1  (Scandinavian Oval) 26 mm Depth A3 (tubular frame) (information with ad- apter plate) 25 mm A4 (panic bar) (information with ad- apter plate) 21 mm (side without...
  • Page 280 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 280 / 302 Versions Centre distance Door thickness S: 38 - 60 mm M: 59 - 80 mm A1/B1 70 - 79 mm Suspended, short L: 79 - 100 mm X: 100 - 200 mm S: 38 - 60 mm M: 59 - 80 mm A2/B2 70 - 110 mm...
  • Page 281 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 281 / 302 Handle turning angle and colours Handle turning angle 48° effective Traffic white (similar to  RAL 9016) Dark grey (similar to RAL 7021)  Deep black (similar to  Cover RAL 9005) Brass ...
  • Page 282 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 282 / 302 Suspended installation 20,5 65,6 52,2 Door thickness...
  • Page 283 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 283 / 302 Stationary installation 20,5 65,6 53,2 Door thickness...
  • Page 284 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 284 / 302 Scandinavian Oval 20,5 65,6 52,2 Door thickness...
  • Page 285 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 285 / 302 Metal frame 20,5 13,5 65,6 52,2 33,4 32,8 32,8 Door thickness...
  • Page 286 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 286 / 302 Panic bars (CISA) 65,6 20,5 52,2 54,0 Door thickness...
  • Page 287 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 287 / 302 Panic bar (BKS) 65,6 20,5 52,2 Door thickness 54,0...
  • Page 288 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 288 / 302 PAS24 20,5 65,6 53,2 Door thickness...
  • Page 289 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 289 / 302 Reader on both sides 20,5 20,5 65,6 52,2 Door thickness...
  • Page 290 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 290 / 302 French 195 mm backplate 20,5 65,0 52,2 58,0 58,0 Door thickness...
  • Page 291 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 291 / 302 17.1.2 Dimensional drawings handles Shape A (Outside/Inside) Shape B (Outside/Inside) Shape C (Outside/Inside)
  • Page 292 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 292 / 302 Shape D (Outside/Inside) Shape L (Outside/Inside)
  • Page 293 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 293 / 302 17.1.3 Drilling templates 17.1.3.1 Drilling template for variant A0 (Upright installation)
  • Page 294 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 294 / 302 17.1.3.2 Drilling template for variant A1 and A2 (Downward mounting)
  • Page 295 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 295 / 302 17.1.3.3 Drilling template for variant A1.PAS24 (Downward mounting with PAS24)
  • Page 296 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 296 / 302 17.1.3.4 Drilling template for variant A3 (Tubular frame)
  • Page 297 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 297 / 302 17.1.3.5 Drilling template for variant A4.P11/A4.P1/A4.P2 (Panic bars)
  • Page 298 SmartIntego Digital SmartHandle AX 17. Technical specifications (Manual) 298 / 302 17.1.3.6 Drilling template for DS variant (Reading on both sides)
  • Page 299 SmartIntego Digital SmartHandle AX 18. Declaration of conformity (Manual) 299 / 302 18. Declaration of conformity The company SimonsVoss Technologies GmbH hereby declares that the articles (SI-S2.*M.WO*, SI-S2.*M.VCN*) comply with the following guidelines: 2014/53/EU -RED-  or for the UK: UK statutory 2017 No. 1206 -Radio equipment- 2011/65/EU -RoHS- ...
  • Page 300 SmartIntego Digital SmartHandle AX 19. Help and other information (Manual) 300 / 302 19. Help and other information Information material/documents You will find detailed information on operation and configuration and other documents on the website: https://www.smartintego.com/int/home/infocenter/documentation Declarations of conformity You will find declarations of conformity and other certificates on the website: https://www.simons-voss.com/en/certificates.html Information on disposal...
  • Page 301 SmartIntego Digital SmartHandle AX 19. Help and other information (Manual) 301 / 302 Address SimonsVoss Technologies GmbH Feringastr. 4 D-85774 Unterfoehring Germany...
  • Page 302 This is SimonsVoss SimonsVoss, the pioneer in remote-controlled, cable-free locking technology provides system solutions with a wide range of products for SOHOs, SMEs, major companies and public institutions. SimonsVoss locking systems combine intelligent functionality, high quality and award- winning design Made in Germany. As an innovative system provider, SimonsVoss focuses on scalable systems, high security, reliable components, powerful software and simple operation.

This manual is also suitable for:

Smartintego smarthandle ax

Table of Contents