Controller Status Read - Omron CS Series Operation Manual

Command/Response Reference
Ethernet Address
(Response)
Response Codes
7-3-3

CONTROLLER STATUS READ

Command Block
Response Block
FFINS/TCP Port Number Setting
0: Default (9600)
1: Unit Setup value
Baud Rate setting
0: Automatic detection
1: 10Base-T
SNTP Server Specification Method
0: IP address
1: Host name
SMTP Server Specification Method
0: IP address
1: Host name
POP Server Specification Method
0: IP address
1: Host name
System Setup Format
Bit address
15 14 13
0 0 0
0 0 0
Other
The Ethernet address of the Ethernet Unit is returned. The Ethernet address
is the address marked on the label on the side of the Ethernet Unit.
Response code
0000 Normal
1001 Command too large
Reads the controller status.
06 01
Command code
06 01
2 byte
Command
Response Error flags
Total number
code
code
packets received
Format classification
12
0 ETN11 mode
1 ETN21 mode
Reserved
Description
4 byte 4 byte 4 byte 4 byte
Total number Total number Total number
of of of
receive errors packets sent errors sent
Section 7-3
4 byte
Total number
of of
send collisions
163