8.8.5
Operation as PPG Output
In PPG output, pulses with the cycle and duty ratio determined by the values set in the compare registers (CR0n: n = 0, 1)
are output (see Figure 8-45).
The control register settings are shown in Figure 8-46, the setting procedure in Figure 8-47, and the procedure for varying
the duty in Figure 8-48.
TM0
Count Value
TO0
(When Active-Low)
234
CHAPTER 8 TIMER/COUNTER 0
Figure 8-45 Example of Timer/Counter 0 PPG Signal Output
CR00
0H
Timer Start
User's Manual U11316EJ4V1UD
CR01
CR01
CR00
CR01
CR00