Table of Contents
Advertisement
4.1 configuring Ports
You can configure the port parameters, including speed/duplexing, flow control, and other
parameters. The port parameters will directly affect the working mode of the port. Make
configurations according to the practical requirements.
Step 1
Select Network Settings > Port.
Step 2
Click OK.
Parameter
Port
Description
Type
Link status
Speed duplexing status
4 Network Settings
Figure 4-1 Port settings
Table 4-1 Port parameters
Description
Displays all ports of the switch.
Enter the description of the port.
The description cannot exceed 64 characters. Only numbers,
letters and the following special characters are allowed: . _ -. The
first character must be a letter and the last character must not be
a special character.
Displays the type of the port, includes two types: Ethernet port
and Optical port.
Includes two status: Up and Down.
● Up: The port is connected.
● Down: The port is not connected or the connection fails.
● Online: Displays the port rate and the duplex mode.
● Offline: Displays Down.
10
Advertisement
Table of Contents
