Power Connection; Disconnecting The Cable - Datalogic QuickScan 2500 Series Product Reference Manual

SETUP
Most connections plug directly into the host device as shown in
Keyboard Wedge interface cables have a 'Y' connection where its female end mates
with the male end of the cable from the keyboard and the remaining end at the key-
board port on the terminal/PC as shown in
Figure 12. Connecting to the Host
Figure 13. Connecting to the Host with Keyboard Wedge.

Power Connection

Plug the AC Adapter into an approved AC wall socket with the cable facing downwards
(as shown in

Disconnecting the Cable

To detach the cable, use a finger or an object to pull-down the flap, as shown below.
Figure 14. Disconnecting the Cable
20
QUICKSCAN™ 2500
) to prevent undue strain on the socket.
Figure 10 on page 19
Figure 12 on page 20
.
Figure 13 on page 20
.