Keyboard Wedge Connection (Quickscan™ Qd2590 Only); Usb Connection - Datalogic QuickScan 2500 Series Product Reference Manual

Keyboard Wedge Connection (QuickScan
The Keyboard Wedge cable has a 'Y' connection from the scanner. Connect the female
to the male end from the keyboard and the remaining end at the keyboard port at the
terminal/PC.
Keyboard Wedge (KBW) :
scanned data as keystrokes and supports several international keyboards (for the Win-
dows

USB Connection

Connect the reader to a USB port on the terminal/PC using the correct USB cable for the
interface type you ordered.
USB :
interface types by scanning the appropriate interface type bar codes available in this
manual. The default interface is USB-KBD, or RS-232-STD.
Figure 4. Connection to the Host
When connected using this interface, the host interprets
®
environment). See
"Setting Country Mode"
Available only for QuickScan
NOTE: The Wedge interface is supported by products manufactured until
June 2023.
Select to communicate either by USB OEM, USB COM STD, or USB Keyboard
NOTE: Specific cables are required for connection to different hosts. The
connections illustrated in Figure 4 are examples only. Actual connectors
may vary from those illustrated, but the steps to connect the reader remain
the same.
CONNECTING THE HOST INTERFACE
QD2590 only)
™
on page 45 for a full listing.
™
QD2590
PRODUCT REFERENCE GUIDE
WEDGE
USB
11