Codabar Set Length 2 - Datalogic QuickScan 2500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Codabar Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
173
fixed length if in Fixed Length Mode. The length includes the bar code's start, stop,
check and data characters. The length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Codabar Length 2 Setting
$CCBL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
174
QUICKSCAN™ 2500
Set Length 2" on page 289
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
1D SYMBOLOGIES
Codabar Length Control" on page
for more detailed pro-
Appendix D, Keypad represent-
CANCEL