Connecting The Host Interface; Rs-232 Serial Connection - Datalogic Gryphon I GFE4500 Product Reference Manual

SETUP

CONNECTING THE HOST INTERFACE

The reader can communicate using the interfaces illustrated on
For USB model, connect the reader cable as shown in "
Cable (GFS4520 Model Only)" on page 6

RS-232 Serial Connection

Turn off power to the terminal/PC and connect the reader to the terminal/PC serial port
via the RS-232 cable as shown in
Off the Terminal) to supply reader power, use the approved power supply (AC Adapter).
Plug the AC Adapter barrel connector into the socket on the RS-232 cable connector and
the AC Adapter plug into a standard power outlet.
RS-232:
host.
RS-232 OPOS:
8
GRYPHON™ GFS4500
The reader can communicate with a standard or Wincor-Nixdorf (W-N) RS-232
This interface is used for OPOS/UPOS/JavaPOS systems.
Video Tutorial
Attaching and Retaining the USB
.
. If the terminal will not support POT (Power
Figure 5
3
.
page 10