Wireless Beeper Features; Good Transmission Beep; Beeper Frequency - Datalogic QuickScan 2500 Series Product Reference Manual

WIRELESS BEEPER FEATURES

Several options are available to configure beeper behavior for wireless operation.

Good Transmission Beep

Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs
when a Label is correctly transmitted to the base.
$CBTAB00

Good Transmission Beep = Enable

Beeper Frequency

Adjusts radio-specific beep indications to sound at a low, medium or high frequency,
selectable from the list below (controls the beeper's pitch/tone).
$CBTBF00
Beep Frequency = Medium
$CBTBF02
WIRELESS BEEPER FEATURES
ENTER/EXIT PROGRAMMING MODE
Good Transmission Beep = Disable
$CBTAB01

Beep Frequency = Low
$CBTBF01
Beep Frequency = High
PRODUCT REFERENCE GUIDE
235