End-Cap Cover; End-Cap Cover Disassembly Procedure - Datalogic QuickScan 2500 Series Product Reference Manual

Figure 6. Adjusting the Stand Arm

END-CAP COVER

End-cap cover disassembly procedure

1. Using a small screwdriver or a similar tool pull out the End-Cap from the scanner
2. The End-Cap is completely removed from the scanner.
NOTE: For QuickScan™ QD2500, to use the Stand Autosense™ (STD-AUTO-
QD25-xx) it is mandatory to remove the End-cap. See the paragraph below.
plastic enclosure.
END-CAP COVER
PRODUCT REFERENCE GUIDE
13