Silent Mode (Not Available For Qw2500) - Datalogic QuickScan 2500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Silent Mode (not available for QW2500)

If needed, audible indications can be disabled by scanning the labels below.
Please note that some important audible notifications are not muted in silent mode and
other notifications are replaced by visual indications.
All changes in audible notifications are summarized here:
•
•
•
SilentModeON

Silent Mode = Disable
100
QUICKSCAN™ 2500
Connection / Disconnection / out of radio range beeps are replaced with blue LED
Error beep, wireless Error/timeout beeps, chirp beeps are replaced with red top
LED
Battery beeps, Programming labels, and wireless paging beeps are not muted
READING PARAMETERS
Silent Mode = Enable
SilentModeOFF