Chapter 3. Configuration With Bar Codes; Configuration Parameters; Interface Configuration; Parameters Common To All Interface Applications - Datalogic QuickScan 2500 Series Product Reference Manual

Hide thumbs Also See for QuickScan 2500 Series:
Table of Contents

Advertisement

CHAPTER 3
CONFIGURATION WITH BAR CODES
This and following sections provide programming bar codes to configure your reader by
changing the default settings. For details about additional methods of programming,
see "
Customizing Configuration Settings" on page 24

CONFIGURATION PARAMETERS

Once the reader is set up, you can change the default parameters to meet your applica-
tion needs. Refer to
order to set the default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to
find the desired function based on its reference group.

Interface Configuration:

Parameters common to all interface applications:

NOTE: You must first enable your QuickScan to read bar codes in order to
use this section. If you have not done this, go to Setup, starting on page 9
and complete the appropriate procedure.
Standard Defaults, starting on page 307
NOTE: In the following sections, text shown with a green star indicates a
factory default value.
RS-232 Standard Settings, starting on page 31
RS-232/USB-COM Settings, starting on page 36
Keyboard Interface, starting on page 43
USB-OEM Interface, starting on page 72
Global Prefix/Suffix, starting on page 77
Data Format, starting on page 76
Host system by selecting parameters to control the message strings sent to the
handheld.
Reading Parameters, starting on page 87
indicators status functioning.
.
This is an example of a default value.
gives options to control the messages sent to the
controls various operating modes and
for initial configuration in
PRODUCT REFERENCE GUIDE
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quickscan qbt2500

Table of Contents