Docking (Connecting) Beep; Leash Alarm - Datalogic QuickScan 2500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Docking (Connecting) Beep

Enables/disables a beep indication when the handheld is placed in the Base Station.
$CBTCB00

Docking Beep = Enable

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode beeps (three per
second) when the handheld goes out of range. This is especially useful in instances
where the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station. If the
reader is asleep or disconnected from the Base Station, there is no way for it to know
where it is relative to the Base Station because communication is not active between
the devices.
$CBTLB00
Leash Alarm = 1 Second
$CBTLB02
Leash Alarm = 3 Seconds
238
QUICKSCAN™ 2500
WIRELESS FEATURES
Docking Beep = Disable
$CBTCB01

Leash Alarm = Disable
$CBTLB01
Leash Alarm = 2 Seconds
$CBTLB03