Disable All Symbologies; Coupon Control - Datalogic QuickScan 2500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE
Scan this label to disable all symbologies.

Coupon Control

This feature is used to control the method of processing coupon labels.
Options are:
•
•
•
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You'll need to cover any unused
3. Complete the programming sequence by scanning the Enter/Exit bar code.
$CCPCL00

Coupon Control = Enable only UPC-A
$CCPCL02
112
QUICKSCAN™ 2500

DISABLE ALL SYMBOLOGIES

$AD
COUPON CONTROL
Allow all — allow all coupon bar codes to be decoded
Enable only UPC/EAN — enables only UPC/EAN coupon decoding
Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
bar codes on this and the facing page to ensure that the reader sees only the bar
code you intend to scan.
Disable All Symbologies
Coupon Control = Allow all
$CCPCL01
Coupon Control = Enable only GS1 DataBar
1D SYMBOLOGIES