Liquicap M FTI51
Endress+Hauser
3
Incoming acceptance and product
identification
3.1
Incoming acceptance
Check whether the packaging or content is damaged. Check that the goods delivered are
complete and compare the scope of delivery with the information in your order.
3.2
Product identification
3.2.1
Nameplate
Different nameplates are used depending on the device version.
The nameplates contain the following information:
• Manufacturer name and device name
• Address of the certificate holder and country of manufacture
• Order code and serial number
• Technical data
• Approval-specific information
Compare the data on the nameplate with your order.
3.2.2
Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Place of manufacture: See nameplate.
3.3
Storage and transport
For storage and transportation, pack the device to protect it against impact. The original
packing offers the best protection for this. The permitted storage temperature is
–50 to +85 °C (–58 to +185 °F).
Incoming acceptance and product identification
9