Incoming Acceptance And Product; Identification; Incoming Acceptance; Product Identification - Endress+Hauser Liquiphant FTL51B Operating Instructions Manual

Incoming acceptance and product identification
10
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Are the order codes on the delivery note and the product sticker identical?
Are the goods undamaged?
Do the nameplate data match the ordering information on the delivery note?
If required (see nameplate): Are the safety instructions (XA) provided?
Is the device properly secured?
If one of these conditions is not satisfied, contact your Endress+Hauser Sales Center.
4.2

Product identification

The measuring device can be identified in the following ways:
• Nameplate data
• Order code with breakdown of the device features on the delivery note
• Enter serial number from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information on the measuring device is displayed
The serial number on the nameplate can also be used to obtain an overview of the
technical documentation supplied with the device in W@MDevice Viewer
(www.endress.com/deviceviewer)
4.2.1

Nameplate

Order code:
Ext. ord. cd.:
Pmax:
0.83 W PNP
L:
Dev.Rev.:
1 2 FW:
1 Manufacturer name and device name
2

Manufacturer address

3 Order code
4 Technical data
5 Approval-specific information
4.2.2 Manufacturer address
Endress+Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Address of the manufacturing plant: See nameplate.
3 Ser. no.:
4
4
Liquiphant FTL51B
5
A0038187
Endress+Hauser