Product Design; Incoming Acceptance And Product; Identification; Incoming Acceptance - Endress+Hauser Liquiphant FTL51B Operating Instructions Manual

Incoming acceptance and product identification
10
3.1

Product design

 1 Product design
1 Housing with electronic insert and cover
2 Temperature spacer, pressure-tight feedthrough, optional
3 Process connection with flange
4 Process connection with thread
5 Standard probe with tuning fork
6 Pipe extension probe with tuning fork
7 Short pipe probe with tuning fork
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

Check the following during incoming acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the data on the nameplate match the ordering information on the delivery note?
 If required (see nameplate): are the Safety Instructions e.g. XA provided?
If one of these conditions is not met, please contact the manufacturer' s sales office.
1
2
3
5 6
Liquiphant FTL51B HART
4
7
Endress+Hauser
A0046337