Wall Bracket - Endress+Hauser Liquicap M FTI51 Operating Instructions Manual

Liquicap M FTI51
1) See parameters on the drawings.
Endress+Hauser
61 (2.4) B
 11 Housing side: wall mounting, pipe mounting, and sensor side. Unit of measurement mm (in)
1)
Values of parameters :
• Polyester housing (F16)
• B: 76 mm (2.99 in)
• H1: 172 mm (6.77 in)
• Stainless steel housing (F15)
• B: 64 mm (2.52 in)
• H1: 166 mm (6.54 in)
• Aluminum housing (F17)
• B: 65 mm (2.56 in)
• H1: 177 mm (6.97 in)
D parameter
• Rod probes ⌀10 mm (0.39 in)
• D: 38 mm (1.5 in)
• H5: 66 mm (2.6 in)
• Rod probes ⌀16 mm (0.63 in), without fully insulated inactive length and threads: G¾",
G1", NPT¾", NPT1", Clamp 1", Clamp 1½", Universal ⌀44 mm (1.73 in), flange < DN50,
ANSI 2", 10K50
• D: 38 mm (1.5 in)
• H5: 66 mm (2.6 in)
• Rod probes ⌀16 mm (0.63 in), without fully insulated inactive length and threads: G1½",
NPT1½", Clamp 2", DIN 11851, flange ≥ DN50, ANSI 2", 10K50
• D: 50 mm (1.97 in)
• H5: 89 mm (3.5 in)
• Rod probes ⌀22 mm (0.87 in), with fully insulated inactive length
• D: 38 mm (1.5 in)
• H5: 89 mm (3.5 in)
4.4.2

Wall bracket

• The wall bracket is a part of the scope of delivery.
• To use the wall bracket as a drill template, the wall bracket must be first screwed to
the separate housing.
• The distance between the holes is reduced by screwing it to the separate housing.
r ≥ 100 (3.94)
75 (2.95) B
Mounting
D
r ≥ 100 (3.94)
A0040471
17